Publications

Investigation of Luminescent Triplet States in Tetranuclear Cu${}^I$ Complexes: Thermochromism and Structural Characterization.
Boden, P.; Di Martino-Fumo, P.; Busch, J. M.; Rehak, F. R.; Steiger, S.; Fuhr, O.; Nieger, M.; Volz, D.; Klopper, W.; Bräse, S.; et al.
2021. Chemistry - a European journal, 27 (17), 5439–5452. doi:10.1002/chem.202004539  

A generalized sample preparation method by incorporation of metal–organic compounds into polymers for electroless metallization.
Atli, A.; Trouillet, V.; Cadete Santos Aires, F. J.; Ehret, E.; Lemaire, E.; Simon, S.
2021. Journal of applied polymer science, 138 (17), Article no: 50276. doi:10.1002/app.50276 

Staircase array of inclined refractive multi-lenses for large field of view pixel super-resolution scanning transmission hard X-ray microscopy.
Mamyrbayev, T.; Ikematsu, K.; Takano, H.; Wu, Y.; Kimura, K.; Doll, P.; Last, A.; Momose, A.; Meyer, P.
2021. Journal of synchrotron radiation, 28 (3). doi:10.1107/S1600577521001521 

Plastic in compost: Prevalence and potential input into agricultural and horticultural soils.
Braun, M.; Mail, M.; Heyse, R.; Amelung, W.
2021. The science of the total environment, 760, Art.-Nr.: 143335. doi:10.1016/j.scitotenv.2020.143335 

Tetravalent Group 14 Derivatives of a Bulky Aminocarbazole.
Strecker, J.; Pfeuffer, B.; Hinz, A.
2021. European journal of inorganic chemistry, 2021 (7), 658–663. doi:10.1002/ejic.202001002  

Nanoscaled Fractal Superstructures via Laser Patterning - A Versatile Route to Metallic Hierarchical Porous Materials.
Reinhardt, H.; Kroll, M.; Karstens, S. L.; Schlabach, S.; Hampp, N. A.; Tallarek, U.
2021. Advanced materials interfaces, 8 (4), Art.Nr. 2000253. doi:10.1002/admi.202000253  

Vertical continuous compound casting of copper aluminum bilayer rods.
Greß, T.; Glück Nardi, V.; Schmid, S.; Hoyer, J.; Rizaiev, Y.; Boll, T.; Seils, S.; Tonn, B.; Volk, W.
2021. Journal of materials processing technology, 288, Art.-Nr.: 116854. doi:10.1016/j.jmatprotec.2020.116854 

Olefin Ring‐closing Metathesis under Spatial Confinement: Morphology−Transport Relationships [in press].
Tallarek, U.; Hochstrasser, J.; Ziegler, F.; Huang, X.; Kübel, C.; Buchmeiser, M. R.
2021. ChemCatChem, 13 (1), 281–292. doi:10.1002/cctc.202001495  

Phosphoric acid and thermal treatments reveal the peculiar role of surface oxygen anions in lithium and manganese-rich layered oxides.
He, J.; Hua, W.; Missiul, A.; Melinte, G.; Das, C.; Tayal, A.; Bergfeldt, T.; Mangold, S.; Liu, X.; Binder, J. R.; et al.
2021. Journal of materials chemistry / A, 9 (1), 264–273. doi:10.1039/D0TA07371G  

Controlled Surface Adhesion of Macrophages via Patterned Antifouling Polymer Brushes.
Striebel, J.; Vorobii, M.; Kumar, R.; Liu, H.-Y.; Yang, B.; Weishaupt, C.; Rodriguez-Emmenegger, C.; Fuchs, H.; Hirtz, M.; Riehemann, K.
2021. Advanced NanoBiomed Research, 1 (1), Art.Nr. 2000029. doi:10.1002/anbr.202000029  

Electric‐Potential‐Induced Complete Control of Magnetization in MnZnSb Metallic Ferromagnets.
Greve, M. M.; Das, B.; Issac, I.; Witte, R.; Wang, D.; Kruk, R.; Hahn, H.; Dasgupta, S.
2021. Advanced electronic materials, 7 (1), Art.Nr. 2000790. doi:10.1002/aelm.202000790 

Microstructural and Chemical Constitution of the Oxide Scale formed on a Pesting-Resistant Mo-Si-Ti Alloy.
Obert, S.; Kauffmann, A.; Seils, S.; Boll, T.; Kauffmann-Weiss, S.; Chen, H.; Anton, R.; Heilmaier, M.
2021. Corrosion science, 178, Art.-Nr. 109081. doi:10.1016/j.corsci.2020.109081 

High temperature strength retention of Cu/Nb nanolaminates through dynamic strain ageing.
Liu, Z.; Snel, J.; Boll, T.; Wang, J. Y.; Monclús, M. A.; Molina-Aldareguía, J. M.; LLorca, J.
2021. Materials science and engineering / A, 799, Article no: 140117. doi:10.1016/j.msea.2020.140117 

Towards Heteroleptic Dicoordinate Cu(II) Complexes.
Kaiser, M.; Göttlicher, J.; Vitova, T.; Hinz, A.
2021. Chemistry - a European journal. doi:10.1002/chem.202100888 

Protein Microarray Immobilization via Epoxide Ring‐Opening by Thiol, Amine, and Azide.
Dadfar, S. M. M.; Sekula‐Neuner, S.; Trouillet, V.; Hirtz, M.
2021. Advanced materials interfaces, 2002117. doi:10.1002/admi.202002117  

Cucurbit[n]uril-Immobilized Sensor Arrays for Indicator-Displacement Assays of Small Bioactive Metabolites.
Zhong, C.; Hu, C.; Kumar, R.; Trouillet, V.; Biedermann, F.; Hirtz, M.
2021. ACS applied nano materials. doi:10.1021/acsanm.1c00293 

Snake‐Inspired, Nano‐Stepped Surface with Tunable Frictional Anisotropy Made from a Shape‐Memory Polymer for Unidirectional Transport of Microparticles.
Wu, W.; Guttmann, M.; Schneider, M.; Thelen, R.; Worgull, M.; Gomard, G.; Hölscher, H.
2021. Advanced functional materials, 2009611. doi:10.1002/adfm.202009611  

The Effect of Patterned Micro-Structure on the Apparent Contact Angle and Three-Dimensional Contact Line.
Foltyn, P.; Restle, F.; Wissmann, M.; Hengsbach, S.; Weigand, B.
2021. Fluids, 6 (2), Article: 92. doi:10.3390/fluids6020092  

The influence of Y and Nb addition on the corrosion resistance of Fe-Cr-Al-Ni model alloys exposed to oxygen-containing molten Pb.
Shi, H.; Fetzer, R.; Tang, C.; Szabó, D. V.; Schlabach, S.; Heinzel, A.; Weisenburger, A.; Jianu, A.; Müller, G.
2021. Corrosion science, 179, Art.-Nr.: 109152. doi:10.1016/j.corsci.2020.109152 

Whole-body x-ray dark-field radiography of a human cadaver.
Andrejewski, J.; De Marco, F.; Willer, K.; Noichl, W.; Gustschin, A.; Koehler, T.; Meyer, P.; Kriner, F.; Fischer, F.; Braun, C.; et al.
2021. European radiology experimental, 5 (6). doi:10.1186/s41747-020-00201-1  

Influence of Temperature and Plastic Strain on Deformation Mechanisms and Kink Band Formation in Homogenized HfNbTaTiZr.
Chen, H.; Hanemann, T.; Seils, S.; Schliephake, D.; Tirunilai, A. S.; Heilmaier, M.; Weiss, K.-P.; Kauffmann, A.
2021. Crystals, 11 (2), 81. doi:10.3390/cryst11020081  

The Creep and Oxidation Behaviour of Pesting-Resistant $(Mo,Ti{)}_{5}S{i}_3$-Containing Eutectic-Eutectoid Mo-Si-Ti Alloys.
Obert, S.; Kauffmann, A.; Pretzler, R.; Schliephake, D.; Hinrichs, F.; Heilmaier, M.
2021. Metals, 11 (1), Art.-Nr.: 169. doi:10.3390/met11010169  

Degradation Characteristics of Electrospun Gas Diffusion Layers with Custom Pore Structures for Polymer Electrolyte Membrane Fuel Cells.
Balakrishnan, M.; Shrestha, P.; Lee, C.; Ge, N.; Fahy, K. F.; Messerschmidt, M.; Scholta, J.; Eifert, L.; Maibach, J.; Zeis, R.; et al.
2021. ACS applied materials & interfaces, acsami.0c15324. doi:10.1021/acsami.0c15324 

Investigation of “Na${}_{2/3}$Co${}_{2/3}$Ti${}_{1/3}$O${}_2$” as a multi-phase positive electrode material for sodium batteries.
Sabi, N.; Sarapulova, A.; Indris, S.; Dsoke, S.; Trouillet, V.; Mereacre, L.; Ehrenberg, H.; Saadoune, I.
2021. Journal of power sources, 481, Article: 229120. doi:10.1016/j.jpowsour.2020.229120 

Role of carbon on the thermal and electrical properties of graphene- enriched silicon oxycarbides.
Gangadhar, J.; Maheshwari, A.; Bordia, R. K.; Shyam Kumar, C. N.; Kubel, C.; Sujith, R.
2020. Ceramics international, 46 (18), 28156–28164. doi:10.1016/j.ceramint.2020.07.314 

Li₂ZrO₃-Coated NCM622 for Application in Inorganic Solid-State Batteries: Role of Surface Carbonates in the Cycling Performance.
Strauss, F.; Teo, J. H.; Maibach, J.; Kim, A.-Y.; Mazilkin, A.; Janek, J.; Brezesinski, T.
2020. ACS applied materials & interfaces, 12 (51), 57146–57154. doi:10.1021/acsami.0c18590 

Designing Structurally Ordered Pt/Sn Nanoparticles in Ionic Liquids and their Enhanced Catalytic Performance.
Dietrich, C.; Hähsler, M.; Wang, W.; Kübel, C.; Behrens, S.
2020. ChemNanoMat, 6 (12), 1854–1862. doi:10.1002/cnma.202000433  

A combined high-throughput and high-content platform for unified on-chip synthesis, characterization and biological screening.
Benz, M.; Asperger, A.; Hamester, M.; Welle, A.; Heissler, S.; Levkin, P. A.
2020. Nature Communications, 11 (1), Art.Nr. 5391. doi:10.1038/s41467-020-19040-0  

Nanowire Facilitated Transfer of Sensitive TEM Samples in a FIB.
Gorji, S.; Kashiwar, A.; Mantha, L. S.; Kruk, R.; Witte, R.; Marek, P.; Hahn, H.; Kübel, C.; Scherer, T.
2020. Ultramicroscopy, 219, Art.Nr. 113075. doi:10.1016/j.ultramic.2020.113075 

Origins of strength and plasticity in the precious metal based High-Entropy Alloy AuCuNiPdPt.
Thiel, F.; Geissler, D.; Nielsch, K.; Kauffmann, A.; Seils, S.; Heilmaier, M.; Utt, D.; Albe, K.; Motylenko, M.; Rafaja, D.; et al.
2020. Acta materialia, 185, 400–411. doi:10.1016/j.actamat.2019.12.020  

Polyaramid-Based Flexible Antibacterial Coatings Fabricated Using Laser-Induced Carbonization and Copper Electroplating.
Mamleyev, E. R.; Falk, F.; Weidler, P. G.; Heissler, S.; Wadhwa, S.; Nassar, O.; Shyam Kumar, C. N.; Kübel, C.; Wöll, C.; Islam, M.; et al.
2020. ACS applied materials & interfaces, 12 (47), 53193–53205. doi:10.1021/acsami.0c13058 

Synthesis and Reactivity of Bis(silylene)-Coordinated Calcium and Divalent Lanthanide Complexes.
Sun, X.; Simler, T.; Reiter, K.; Weigend, F.; Roesky, P. W.
2020. Chemistry - a European journal, 26 (65), 14888–14895. doi:10.1002/chem.202003417  

Regeneration of β-Cyclodextrin Based Membrane by Photodynamic Disulfide Exchange — Steroid Hormone Removal from Water.
Dong, Z.; Tagliavini, M.; Darmadi, J.; Trouillet, V.; Schäfer, A. I.; Levkin, P. A.
2020. Advanced materials interfaces, 7 (22), Art.-Nr.: 1902100. doi:10.1002/admi.201902100  

The Effect of Substituents on the Formation of Silyl [PSiP] Pincer Cobalt(I) Complexes and Catalytic Application in Both Nitrogen Silylation and Alkene Hydrosilylation.
Dong, Y.; Zhang, P.; Fan, Q.; Du, X.; Xie, S.; Sun, H.; Li, X.; Fuhr, O.; Fenske, D.
2020. Inorganic chemistry, 59 (22), 16489–16499. doi:10.1021/acs.inorgchem.0c02332 

A versatile Diels–Alder approach to functionalized hydroanthraquinones.
Beck, J.; Fuhr, O.; Nieger, M.; Bräse, S.
2020. Royal Society Open Science, 7 (11), Article: 200626. doi:10.1098/rsos.200626  

Elucidating the Mechanism of Li Insertion into Fe${}_{1-x}$S/Carbon via In Operando Synchrotron Studies.
Li, C.; Sarapulova, A.; Pfeifer, K.; Luo, X.; Maria Casati, N. P.; Welter, E.; Melinte, G.; Fu, Q.; Dsoke, S.
2020. ACS applied materials & interfaces, 12 (47), 52691–52700. doi:10.1021/acsami.0c15500 

A large field-of-view high-resolution hard x-ray microscope using polymer optics.
Qiao, Z.; Shi, X.; Kenesei, P.; Last, A.; Assoufid, L.; Islam, Z.
2020. Review of scientific instruments, 91 (11), 113703. doi:10.1063/5.0011961 

Element-resolved study on the evolution of magnetic response in FexN compounds.
Chen, Y.-C.; Gölden, D.; Dirba, I.; Huang, M.-J.; Gutfleisch, O.; Nagel, P.; Merz, M.; Schuppler, S.; Schütz, G.; Alff, L.; et al.
2020. Journal of magnetism and magnetic materials, 498, Article no: 166219. doi:10.1016/j.jmmm.2019.166219 

A mono‐substituted silicon(II) cation – A crystalline “supersilylene”.
Hinz, A.
2020. Angewandte Chemie / International edition, 59 (43), 19065–19069. doi:10.1002/anie.202009874  

Polymer-based spherical activated carbon – ultrafiltration (UF-PBSAC) for the adsorption of steroid hormones from water: Material characteristics and process configuration.
Tagliavini, M.; Weidler, P. G.; Njel, C.; Pohl, J.; Richter, D.; Böhringer, B.; Schäfer, A. I.
2020. Water research, 185, Art.-Nr.: 116249. doi:10.1016/j.watres.2020.116249 

Inverse Vulcanization of Styrylethyltrimethoxysilane–Coated Surfaces, Particles, and Crosslinked Materials.
Scheiger, J. M.; Direksilp, C.; Falkenstein, P.; Welle, A.; Koenig, M.; Heissler, S.; Matysik, J.; Levkin, P. A.; Theato, P.
2020. Angewandte Chemie / International edition, 59 (42), 18639–18645. doi:10.1002/anie.202006522  

Molecular Changes in Vapor‐Based Polymer Thin Films Assessed by Characterization of Swelling Properties of Amine‐Functionalized Poly‐xylylene.
Koenig, M.; Trouillet, V.; Welle, A.; Hinrichs, K.; Lahann, J.
2020. Macromolecular chemistry and physics, 221 (19), Art.-Nr. 2000213. doi:10.1002/macp.202000213 

A One‐Step Biofunctionalization Strategy of Electrospun Scaffolds Enables Spatially Selective Presentation of Biological Cues.
Wieringa, P.; Girao, A.; Ahmed, M.; TruckenmÜller, R.; Welle, A.; Micera, S.; Wezel, R.; Moroni, L.
2020. Advanced materials technologies, 5 (10), Art.Nr. 2000269. doi:10.1002/admt.202000269  

Unveiling the intrinsic reaction between silicon-graphite composite anode and ionic liquid electrolyte in lithium-ion battery.
Wu, R.; Liu, X.; Zheng, Y.; Li, Y.; Shi, H.; Cheng, X.; Pfleging, W.; Zhang, Y.
2020. Journal of power sources, 473, Article: 228481. doi:10.1016/j.jpowsour.2020.228481 

Nanostructured Fe–Cr–W Steel Exhibits Enhanced Resistance to Self-Ion Irradiation.
Mazilkin, A.; Ivanisenko, Y.; Sauvage, X.; Etienne, A.; Radiguet, B.; Valiev, R.; Abramova, M.; Enikeev, N.
2020. Advanced engineering materials, 22 (10), Art. Nr.: 1901333. doi:10.1002/adem.201901333 

Multi-material 3D microstructures with photochemically adaptive mechanical properties.
Gernhardt, M.; Frisch, H.; Welle, A.; Jones, R.; Wegener, M.; Blasco, E.; Barner-Kowollik, C.
2020. Journal of materials chemistry / C, 8 (32), 10993–11000. doi:10.1039/d0tc02751k 

Thioacetate‐Based Initiators for the Synthesis of Thiol‐End‐Functionalized Poly(2‐oxazoline)s.
Gil Alvaradejo, G.; Glassner, M.; Kumar, R.; Trouillet, V.; Welle, A.; Wang, Y.; Rosa, V. R.; Sekula‐Neuner, S.; Hirtz, M.; Hoogenboom, R.; et al.
2020. Macromolecular rapid communications, 41 (18), Art.Nr. 2000320. doi:10.1002/marc.202000320  

Impact of silver incorporation at the back contact of Kesterite solar cells on structural and device properties.
Mwakyusa, L. P.; Leist, L.; Rinke, M.; Welle, A.; Paetzold, U. W.; Richards, B. S.; Hetterich, M.
2020. Thin solid films, 709, Art.-Nr. 138223. doi:10.1016/j.tsf.2020.138223 

Iron limitation – A perspective on a growth-restricted cultivation strategy for a H₂ production system using the diazotrophic cyanobacterium Nostoc PCC 7120 ΔhupW.
Howe, C.; Becker, D.; Steinweg, C.; Posten, C.; Stensjö, K.
2020. Bioresource technology reports, 11, Art.-Nr.: 100508. doi:10.1016/j.biteb.2020.100508  

Microfluidic Crystallization of Surfactant-Free Doped Zinc Sulfide Nanoparticles for Optical Bioimaging Applications.
Tajoli, F.; Dengo, N.; Mognato, M.; Dolcet, P.; Lucchini, G.; Faresin, A.; Grunwaldt, J.-D.; Huang, X.; Badocco, D.; Maggini, M.; et al.
2020. ACS applied materials & interfaces, 12 (39), 44074–44087. doi:10.1021/acsami.0c13150 

Synthesis and Characterization of a Multication Doped Mn Spinel, LiNi${}_{0.3}$Cu${}_{0.1}$Fe${}_{0.2}$Mn${}_{1.4}$O${}_4$, as 5 V Positive Electrode Material.
Sharma, P.; Das, C.; Indris, S.; Bergfeldt, T.; Mereacre, L.; Knapp, M.; Geckle, U.; Ehrenberg, H.; Darma, M. S. D.
2020. ACS omega, 5 (36), 22861–22873. doi:10.1021/acsomega.0c02174  

Fully Printed Inverters using Metal‐Oxide Semiconductor and Graphene Passives on Flexible Substrates.
Singaraju, S. A.; Marques, G. C.; Gruber, P.; Kruk, R.; Hahn, H.; Breitung, B.; Aghassi-Hagmann, J.
2020. Physica status solidi / Rapid research letters, 14 (9), Art.Nr. 2000252. doi:10.1002/pssr.202000252  

Electrochemical and compositional characterization of solid interphase layers in an interface-modified solid-state Li–sulfur battery.
Pervez, S. A.; Vinayan, B. P.; Cambaz, M. A.; Melinte, G.; Diemant, T.; Braun, T.; Karkera, G.; Behm, R. J.; Fichtner, M.
2020. Journal of materials chemistry / A, 8 (32), 16451–16462. doi:10.1039/d0ta05014h 

Correction: Pyridine N-oxide promoted hydrosilylation of carbonyl compounds catalyzed by [PSiP]-pincer iron hydrides.
Chang, G.; Zhang, P.; Yang, W.; Xie, S.; Sun, H.; Li, X.; Fuhr, O.; Fenske, D.
2020. Dalton transactions, 49 (32), 11412. doi:10.1039/d0dt90147d  

Tailored Silicon/Carbon Compounds for Printed Li–Ion Anodes.
Sukkurji, P. A.; Issac, I.; Singaraju, S. A.; Velasco, L.; Hagmann, J. A.; Bessler, W.; Hahn, H.; Botros, M.; Breitung, B.
2020. Batteries & supercaps, 3 (8), 713–720. doi:10.1002/batt.202000052  

Hot-embossed microcone-textured fluoropolymer as self-cleaning and anti-reflective photovoltaic module covers.
Roslizar, A.; Dottermusch, S.; Schmager, R.; Guttmann, M.; Gomard, G.; Hölscher, H.; Richards, B. S.; Paetzold, U. W.
2020. Solar energy materials & solar cells, 214, 110582. doi:10.1016/j.solmat.2020.110582 

Mechanochemical CO2 methanation over LaNi-based alloys.
Yatagai, K.; Shishido, Y.; Gemma, R.; Boll, T.; Uchida, H.-H.; Oguri, K.
2020. International journal of hydrogen energy, 45 (8), 5264–5275. doi:10.1016/j.ijhydene.2019.07.055 

Coordination Compounds of 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-Oxide (DOPO) Ligands: Extremely High Thermostability and Ligand Oxidation in the Solid State.
Goedderz, D.; Schäfer, T.; Klitsch, J.; Weber, L.; Weber, B.; Fuhr, O.; Buntkowsky, G.; Schönberger, F.; Döring, M.
2020. European journal of inorganic chemistry, 2020 (25), 2444–2456. doi:10.1002/ejic.202000269 

Adhesive Ion‐Gel as Gate Insulator of Electrolyte‐Gated Transistors.
Jeong, J.; Singaraju, S. A.; Aghassi‐Hagmann, J.; Hahn, H.; Breitung, B.
2020. ChemElectroChem, 7 (13), 2735–2739. doi:10.1002/celc.202000305  

[CNC]-Pincer Cobalt Hydride Catalyzed Distinct Selective Hydrosilylation of Aryl Alkene and Alkyl Alkene.
Xie, S.; Li, X.; Sun, H.; Fuhr, O.; Fenske, D.
2020. Organometallics, 39 (13), 2455–2463. doi:10.1021/acs.organomet.0c00251 

Ni${}_{60}$Nb${}_{40}$ Nanoglass for Tunable Magnetism and Methanol Oxidation.
Baksi, A.; Nandam, S. H.; Wang, D.; Kruk, R.; Chellali, M. R.; Ivanisenko, J.; Gallino, I.; Hahn, H.; Bag, S.
2020. ACS applied nano materials, 3 (7), 7252–7259. doi:10.1021/acsanm.0c01584 

Liquid compound refractive X-ray lens.
Last, A.; Gutekunst, J.; Opolka, A.; Krug, M.; Schwitzke, C.; Koch, R.; Mohr, J.
2020. Optics express, 28 (15), 22144–22150. doi:10.1364/OE.389058  

Influence of topological structure and chemical segregation on the thermal and mechanical properties of Pd–Si nanoglasses.
Nandam, S. H.; Adjaoud, O.; Schwaiger, R.; Ivanisenko, Y.; Chellali, M. R.; Wang, D.; Albe, K.; Hahn, H.
2020. Acta materialia, 193, 252–260. doi:10.1016/j.actamat.2020.03.021 

Reversible Surface Wettability by Silanization.
Brehm, M.; Scheiger, J. M.; Welle, A.; Levkin, P. A.
2020. Advanced materials interfaces, 7 (12), Art. Nr.: 1902134. doi:10.1002/admi.201902134  

High quality epitaxial Mn${}_2$Au (001) thin films grown by molecular beam epitaxy.
Bommanaboyena, S. P.; Bergfeldt, T.; Heller, R.; Kläui, M.; Jourdan, M.
2020. Journal of applied physics, 127 (24), Art.-Nr.: 243901. doi:10.1063/5.0009566 

Palladium-Based Bimetallic Nanocrystal Catalysts for the Direct Synthesis of Hydrogen Peroxide.
Wang, S.; Doronkin, D. E.; Hähsler, M.; Huang, X.; Wang, D.; Grunwaldt, J.-D.; Behrens, S.
2020. ChemSusChem, 13 (12), 3243–3251. doi:10.1002/cssc.202000407  

Scanner‐Based Capillary Stamping.
Hou, P.; Kumar, R.; Oberleiter, B.; Kohns, R.; Enke, D.; Beginn, U.; Fuchs, H.; Hirtz, M.; Steinhart, M.
2020. Advanced functional materials, 30 (25), Art. Nr.: 2001531. doi:10.1002/adfm.202001531  

Enhanced Stability of Lipid Structures by Dip-Pen Nanolithography on Block-Type MPC Copolymer.
Liu, H.-Y.; Kumar, R.; Takai, M.; Hirtz, M.
2020. Molecules, 25 (12), Article no: 2768. doi:10.3390/molecules25122768  

Synergistic Physical and Chemical Enhancement Effects Observed on Surface-Enhanced Raman Spectroscopy Substrates of Silver-Coated, Barrier-Type Anodic Alumina.
Okeil, S.; Pashchanka, M.; Heinschke, S.; Bruns, M.; Schneider, J. J.
2020. The journal of physical chemistry <Washington, DC> / C, 124 (24), 13316–13328. doi:10.1021/acs.jpcc.0c00552 

Chemical and Structural Evolution during the Synthesis of Layered Li(Ni,Co,Mn)O${}_2$ Oxides.
Hua, W.; Wang, K.; Knapp, M.; Schwarz, B.; Wang, S.; Liu, H.; Lai, J.; Müller, M.; Schökel, A.; Missyul, A.; et al.
2020. Chemistry of materials, 32 (12), 4984–4997. doi:10.1021/acs.chemmater.9b05279 

Enabling high rate capability, low internal resistance, and excellent cyclability for vanadium redox flow batteries utilizing ultrafast laser-structured graphite felt.
Daugherty, M. C.; Hsieh, C.-T.; Aaron, D. S.; Ashraf Gandomi, Y.; Li, J.; Zheng, Y.; Pfleging, W.
2020. Electrochimica acta, 344, 136171. doi:10.1016/j.electacta.2020.136171 

Challenges and Perspectives of the Phase Formation of Internally Oxidized PIT-Type $N{b}_{3}Sn$ Conductors.
Buehler, C.; Holzapfel, B.; Sailer, B.; Wanior, M.; Abaecherli, V.; Thoener, M.; Schlenga, K.; Kauffmann-WEISS, S.; Haenisch, J.; Heilmaier, M.
2020. IEEE transactions on applied superconductivity, 30 (4), Article: 6000805. doi:10.1109/TASC.2020.2969906 

Effect of the Buffer on the Buildup and Stability of Tannic Acid/Collagen Multilayer Films Applied as Antibacterial Coatings.
Iqbal, M. H.; Schroder, A.; Kerdjoudj, H.; Njel, C.; Senger, B.; Ball, V.; Meyer, F.; Boulmedais, F.
2020. ACS applied materials & interfaces, 12 (20), 22601–22612. doi:10.1021/acsami.0c04475 

Influence of a Nanoporous Silicon Layer on the Practical Implementation and Specific Features of the Epitaxial Growth of GaN Layers on SiC/por-Si/c-Si Templates.
Seredin, P. V.; Goloshchapov, D. L.; Zolotukhin, D. S.; Lenshin, A. S.; Khudyakov, Y. Y.; Mizerov, A. M.; Timoshnev, S. N.; Arsentyev, I. N.; Beltyukov, A. N.; Leiste, H.; et al.
2020. Semiconductors, 54 (5), 596–608. doi:10.1134/S1063782620050115 

Role of intermediate 4f states in tuning the band structure of high entropy oxides.
Sarkar, A.; Eggert, B.; Velasco, L.; Mu, X.; Lill, J.; Ollefs, K.; Bhattacharya, S. S.; Wende, H.; Kruk, R.; Brand, R. A.; et al.
2020. APL materials, 8 (5), Art.Nr. 051111. doi:10.1063/5.0007944  

Shack–Hartmann wavefront sensors based on 2D refractive lens arrays and super-resolution multi-contrast X-ray imaging.
Mikhaylov, A.; Reich, S.; Zakharova, M.; Vlnieska, V.; Laptev, R.; Plech, A.; Kunka, D.
2020. Journal of synchrotron radiation, 27 (3), 788–795. doi:10.1107/S1600577520002830  

CMOS-compatible, Flexible, Intracortical Neural Probes.
Barz, F.; Trouillet, V.; Paul, O.; Ruther, P.
2020. IEEE transactions on biomedical engineering, 67 (5), 1366–1376. doi:10.1109/TBME.2019.2936740 

Local Structure and Magnetism of Fe2O3 Maghemite Nanocrystals: The Role of Crystal Dimension.
Coduri, M.; Masala, P.; Bianco, L. D.; Spizzo, F.; Ceresoli, D.; Castellano, C.; Cappelli, S.; Oliva, C.; Checchia, S.; Allieta, M.; et al.
2020. Nanomaterials, 10 (5), 867. doi:10.3390/nano10050867  

Understanding the Origin of Higher Capacity for Ni-Based Disordered Rock-Salt Cathodes.
Cambaz, M. A.; Urban, A.; Pervez, S. A.; Geßwein, H.; Schiele, A.; Guda, A. A.; Bugaev, A. L.; Mazilkin, A.; Diemant, T.; Behm, R. J.; et al.
2020. Chemistry of materials, 32 (8), 3447–3461. doi:10.1021/acs.chemmater.9b05285 

Nonenzymatic Glucose Sensing Using Ni60Nb40 Nanoglass.
Bag, S.; Baksi, A.; Nandam, S. H.; Wang, D.; Ye, X.; Ghosh, J.; Pradeep, T.; Hahn, H.
2020. ACS nano, 14 (5), 5543–5552. doi:10.1021/acsnano.9b09778 

Effect of the transition porous silicon layer on the properties of hybrid GaN/SiC/por-Si/Si(1 1 1) heterostructures.
Seredin, P. V.; Leiste, H.; Lenshin, A. S.; Mizerov, A. M.
2020. Applied surface science, 508, Art. Nr.: 145267. doi:10.1016/j.apsusc.2020.145267 

Assessment of high-resolution 3D printed optics for the use case of rotation optics.
Sieber, I.; Thelen, R.; Gengenbach, U.
2020. Optics express, 28 (9), 13423–13431. doi:10.1364/OE.391697  

Temperature dependent strengthening contributions in austenitic and ferritic ODS steels.
Seils, S.; Kauffmann, A.; Hinrichs, F.; Schliephake, D.; Boll, T.; Heilmaier, M.
2020. Materials science and engineering / A, 786, Article: 139452. doi:10.1016/j.msea.2020.139452 

Lewis acid promoted dehydration of amides to nitriles catalyzed by [PSiP]‐pincer iron hydrides.
Chang, G.; Li, X.; Zhang, P.; Yang, W.; Li, K.; Wang, Y.; Sun, H.; Fuhr, O.; Fenske, D.
2020. Applied organometallic chemistry, 34 (4), Art.-Nr. e5466. doi:10.1002/aoc.5466 

Configurable Resistive Response in BaTiO${}_3$ Ferroelectric Memristors via Electron Beam Radiation.
Molinari, A.; Witte, R.; Neelisetty, K. K.; Gorji, S.; Kübel, C.; Münch, I.; Wöhler, F.; Hahn, L.; Hengsbach, S.; Bade, K.; et al.
2020. Advanced materials, 32 (12), Art.-Nr. 1907541. doi:10.1002/adma.201907541 

How Does Chemistry Influence Liquid Wettability on Liquid-Infused Porous Surface?.
Maji, K.; Das, A.; Hirtz, M.; Manna, U.
2020. ACS applied materials & interfaces, 12 (12), 14531–14541. doi:10.1021/acsami.9b22469 

Adsorption and superficial transport of oil on biological and bionic superhydrophobic surfaces: a novel technique for oil–water separation.
Barthlott, W.; Moosmann, M.; Noll, I.; Akdere, M.; Wagner, J.; Roling, N.; Koepchen-Thomä, L.; Azad, M. A. K.; Klopp, K.; Gries, T.; et al.
2020. Philosophical transactions of the Royal Society of London / A, 378 (2167), Art. Nr.: 20190447. doi:10.1098/rsta.2019.0447 

Synergies between Surface Microstructuring and Molecular Nanopatterning for Controlling Cell Populations on Polymeric Biointerfaces.
Díaz Lantada, A.; Kumar, R.; Guttmann, M.; Wissmann, M.; Schneider, M.; Worgull, M.; Hengsbach, S.; Rupp, F.; Bade, K.; Hirtz, M.; et al.
2020. Polymers, 12 (3), Article No.655. doi:10.3390/polym12030655  

Effect of process parameters on surface texture generated by laser polishing of additively manufactured Ti-6Al-4V.
dos Santos Solheid, J.; Elkaseer, A.; Wunsch, T.; Charles, A.; Seifert, H. J.; Pfleging, W.
2020. U. Klotzbach, R. Kling & A. Watanabe (Eds.), Laser-based Micro- and Nanoprocessing XIV, 24 S., Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2545623  

Unraveling the effect of ZrO2 modifiers on the nature of active sites on AuRu/ZrO2 catalysts for furfural hydrogenation.
Morandi, S.; Manzoli, M.; Chan-Thaw, C. E.; Bonelli, B.; Stucchi, M.; Prati, L.; Störmer, H.; Wang, W.; Wang, D.; Pabel, M.; et al.
2020. Sustainable energy & fuels, 4 (3), 1469–1480. doi:10.1039/c9se00847k 

Tracing intermediate phases during crystallization in a Ni–Zr metallic glass.
Liu, S. Y.; Cao, Q. P.; Mu, X.; Xu, T. D.; Wang, D.; Ståhl, K.; Wang, X. D.; Zhang, D. X.; Kübel, C.; Jiang, J. Z.
2020. Acta materialia, 186, 396–404. doi:10.1016/j.actamat.2020.01.016 

Tailoring the Oxygen Reduction Activity of Pt Nanoparticles through Surface Defects: A Simple Top-Down Approach.
Fichtner, J.; Watzele, S.; Garlyyev, B.; Kluge, R. M.; Haimerl, F.; El-Sayed, H. A.; Li, W.-J.; Maillard, F. M.; Dubau, L.; Chattot, R.; et al.
2020. ACS catalysis, 10 (5), 3131–3142. doi:10.1021/acscatal.9b04974 

N${}_2$ Silylation Catalyzed by a Bis(silylene)-Based [SiCSi] Pincer Hydrido Iron(II) Dinitrogen Complex.
Li, S.; Wang, Y.; Yang, W.; Li, K.; Sun, H.; Li, X.; Fuhr, O.; Fenske, D.
2020. Organometallics, 39 (5), 757–766. doi:10.1021/acs.organomet.0c00025 

An Air-Stable N-Heterocyclic [PSiP] Pincer Iron Hydride and an Analogous Nitrogen Iron Hydride: Synthesis and Catalytic Dehydration of Primary Amides to Nitriles.
Wang, Y.; Zhang, H.; Xie, S.; Sun, H.; Li, X.; Fuhr, O.; Fenske, D.
2020. Organometallics, 39 (6), 824–833. doi:10.1021/acs.organomet.9b00880 

HRXRD study of the effect of a nanoporous silicon layer on the epitaxial growth quality of GaN layer on the templates of SiC/por-Si/c-Si.
Seredin, P. V.; Leiste, H.; Lenshin, A. S.; Mizerov, A. M.
2020. Results in Physics, 16, Art. Nr.: 102919. doi:10.1016/j.rinp.2019.102919  

Efficient dehydration of primary amides to nitriles catalyzed by phosphorus‐chalcogen chelated iron hydrides.
Li, K.; Sun, H.; Yang, W.; Wang, Y.; Xie, S.; Li, X.; Fuhr, O.; Fenske, D.
2020. Applied organometallic chemistry, 34 (3). doi:10.1002/aoc.5337 

Heteronuclear Iron(III)–Schiff Base Complexes with the Hexacyanidocobaltate(III) Anion: On the Quest To Understand the Governing Factors of Spin Crossover.
Pavlik, J.; Masárová, P.; Nemec, I.; Fuhr, O.; Ruben, M.; Šalitroš, I.
2020. Inorganic chemistry, 59 (5), 2747–2757. doi:10.1021/acs.inorgchem.9b03097 

Development and co-integration of a SMA/Si bimorph nanoactuator for Si photonic circuits.
Rastjoo, S.; Fechner, R.; Bumke, L.; Kötz, M.; Quandt, E.; Kohl, M.
2020. Microelectronic engineering, 225, Article: 111257. doi:10.1016/j.mee.2020.111257 

E‐Selective Hydrothiolation of Terminal Arylallenes with Arylthiols Catalyzed by Ni (PMe).
Ren, S.; Xue, B.; Zheng, T.; Wang, Y.; Sun, H.; Li, X.; Fuhr, O.; Fenske, D.
2020. Applied organometallic chemistry, 34 (2), Art.-Nr. e5291. doi:10.1002/aoc.5291 

Thermally Induced Structural Reordering in Li- and Mn-Rich Layered Oxide Li Ion Cathode Materials.
Sigel, F.; Schwarz, B.; Kleiner, K.; Dräger, C.; Esmezjan, L.; Yavuz, M.; Indris, S.; Ehrenberg, H.
2020. Chemistry of materials, 32 (3), 1210–1223. doi:10.1021/acs.chemmater.9b04355 

Evaluation of Microfluidic Ceiling Designs for the Capture of Circulating Tumor Cells on a Microarray Platform.
Liu, H.; Koch, C.; Haller, A.; Joosse, S. A.; Kumar, R.; Vellekoop, M. J.; Horst, L. J.; Keller, L.; Babayan, A.; Failla, A. V.; et al.
2020. Advanced biosystems, 4 (2), 1900162. doi:10.1002/adbi.201900162  

Early deformation mechanisms in the shear affected region underneath a copper sliding contact.
Haug, C.; Ruebeling, F.; Kashiwar, A.; Gumbsch, P.; Kübel, C.; Greiner, C.
2020. Nature Communications, 11 (1), Art.-Nr. 839. doi:10.1038/s41467-020-14640-2  

Covalently Modulated and Transiently Visible Writing: Rational Association of Two Extremes of Water Wettabilities.
Das, S.; Kumar, R.; Parbat, D.; Sekula-Neuner, S.; Hirtz, M.; Manna, U.
2020. ACS applied materials & interfaces, 12 (2), 2935–2943. doi:10.1021/acsami.9b17470 

Focusing system of synchrotron radiation with refractive mosaic lenses for the station “extreme state of matter” of the VEPP-4.
Berdyugin, A.; Tolochko, B.; Nazmov, V.; Kosov, A.; Evdokov, O.
2020. Internetional Conference on Synchrotron and Free Electron Laser Radiation: Generation and Application, SFR 2020, Budker Institute of Nuclear Physics SB RAS, Novosibirsk, Russian Federation, 13th - 16th July 2020, 050005, AIP Publishing. doi:10.1063/5.0033551 

In Situ Thermal-Stage Fitted-STEM Characterization of Spherical-Shaped Co/MoS${}_2$ Nanoparticles for Conversion of Heavy Crude Oils.
Ramos, M.; Galindo-Hernández, F.; Torres, B.; Domínguez-Esquivel, J. M.; Heilmaier, M.
2020. Catalysts, 10 (11), Art.-Nr.: 1239. doi:10.3390/catal10111239  

Unprecedented palladium(II) complex containing dipodal 1,3,4-thiadiazole derivatives: synthesis, structure, and biological and thermal investigations.
Heidari, L.; Ghassemzadeh, M.; Fenske, D.; Fuhr, O.; Saeidifar, M.; Mohsenzadeh, F.
2020. New journal of chemistry, 44 (39), 16769–16775. doi:10.1039/d0nj02918a 

Interaction of Polyoxometalates and Nanoparticles with Collector Surfaces—Focus on the Use of Streaming Current Measurements at Flat Surfaces.
Lützenkirchen, J.; Darbha, G. K.; Chakravadhanula, V. S. K.; Redel, E.; Selmani, A.; Vayssières, L.
2020. Colloids and interfaces, 4 (3), Art.-Nr.: 39. doi:10.3390/colloids4030039  

Porosity and Structure of Hierarchically Porous Ni/Al₂O₃ Catalysts for CO₂ Methanation.
Weber, S.; Abel, K. L.; Zimmermann, R. T.; Huang, X.; Bremer, J.; Rihko-Struckmann, L. K.; Batey, D.; Cipiccia, S.; Titus, J.; Poppitz, D.; et al.
2020. Catalysts, 10 (12), Art. Nr.: 1471. doi:10.3390/catal10121471  

Synthesis and Transport Studies of a Cofacial Porphyrin Cyclophane.
Zwick, P.; Hsu, C.; El Abbassi, M.; Fuhr, O.; Fenske, D.; Dulić, D.; Van Der Zant, H. S. J.; Mayor, M.
2020. The journal of organic chemistry, 85 (23), 15072–15081. doi:10.1021/acs.joc.0c01957 

Phase transition kinetics in austempered ductile iron (ADI) with regard to MO content.
Landesberger, M.; Koos, R.; Hofmann, M.; Li, X.; Boll, T.; Petry, W.; Volk, W.
2020. Materials, 13 (22), Art.-Nr.: 5266. doi:10.3390/ma13225266  

Microplotter-Printed On-Chip Combinatorial Library of Ink-Derived Multiple Metal Oxides as an “Electronic Olfaction” Unit.
Fedorov, F. S.; Simonenko, N. P.; Trouillet, V.; Volkov, I. A.; Plugin, I. A.; Rupasov, D. P.; Mokrushin, A. S.; Nagornov, I. A.; Simonenko, T. L.; Vlasov, I. S.; et al.
2020. ACS applied materials & interfaces, 12 (50), 56135–56150. doi:10.1021/acsami.0c14055 

Bioreplicated coatings for photovoltaic solar panels nearly eliminate light pollution that harms polarotactic insects.
Fritz, B.; Horváth, G.; Hünig, R.; Pereszlényi, Á.; Egri, Á.; Guttmann, M.; Schneider, M.; Lemmer, U.; Kriska, G.; Gomard, G.
2020. (O. Ostroverkhova, Ed.)PLOS ONE, 15 (12), Art.-Nr. e0243296. doi:10.1371/journal.pone.0243296  

A multifunctional use of bis(methylene)bis(5-bromo-2-hydroxyl salicyloylhydrazone): From metal sensing to ambient catalysis of A3 coupling reactions.
Peewasan, K.; Merkel, M. P.; Fuhr, O.; Anson, C. E.; Powell, A. K.
2020. RSC Advances, 10 (67), 40739–40744. doi:10.1039/d0ra07687b  

Investigation on the formation of Mg metal anode/electrolyte interfaces in Mg/S batteries with electrolyte additives.
Bhaghavathi Parambath, V.; Zhao-Karger, Z.; Diemant, T.; Jäckle, M.; Li, Z.; Scherer, T.; Gross, A.; Behm, R. J.; Fichtner, M.
2020. Journal of materials chemistry / A, 8 (43), 22998–23010. doi:10.1039/d0ta05762b 

Artificial Intelligence Aided Design of Microtextured Surfaces: Application to Controlling Wettability.
Díaz Lantada, A.; Franco-Martínez, F.; Hengsbach, S.; Rupp, F.; Thelen, R.; Bade, K.
2020. Nanomaterials, 10 (11), Article no: 2287. doi:10.3390/nano10112287  

Self-aligned single-exposure deep x-ray lithography.
Nazmov, V. P.; Goldenberg, B. G.; Reznikova, E. F.; Boerner, M.
2020. SYNCHROTRON AND FREE ELECTRON LASER RADIATION: Generation and Application (SFR-2020), Article no: 060010, AIP Publishing. doi:10.1063/5.0030469 

Linear size contraction of ligand protected Ag${}_{29}$ clusters by substituting Ag with Cu.
Baksi, A.; Schneider, E. K.; Weis, P.; Chakraborty, I.; Fuhr, O.; Lebedkin, S.; Parak, W. J.; Kappes, M. M.
2020. ACS nano. doi:10.1021/acsnano.0c05082 

On the formation of nano-sized precipitates during cooling of NiAl- strengthened ferritic alloys.
Lawitzki, R.; Beinke, D.; Wang, D.; Schmitz, G.
2020. Materials characterization, Art. Nr.: 110722. doi:10.1016/j.matchar.2020.110722 

Solvent-driven chirality for luminescent self-assembled structures: Experiments and theory.
Lochenie, C.; Insuasty, A.; Battisti, T.; Pesce, L.; Gardin, A.; Perego, C.; Dentinger, M.; Wang, D.; Pavan, G. M.; Aliprandi, A.; et al.
2020. Nanoscale, 12 (41), 21359–21367. doi:10.1039/d0nr04524a 

Magnetotransport Properties of Ferromagnetic Nanoparticles in a Semiconductor Matrix Studied by Precise Size-Selective Cluster Ion Beam Deposition.
Gack, N.; Iankevich, G.; Benel, C.; Kruk, R.; Wang, D.; Hahn, H.; Reisinger, T.
2020. Nanomaterials, 10 (11), Article: 2192. doi:10.3390/nano10112192  

Double donation in trigonal planar iron–carbodiphosphorane complexes – a concise study on their spectroscopic and electronic properties.
Kneusels, N.-J. H.; Münzer, J. E.; Flosdorf, K.; Jiang, D.; Neumüller, B.; Zhao, L.; Eichhöfer, A.; Frenking, G.; Kuzu, I.
2020. Dalton transactions, 49 (8), 2537–2546. doi:10.1039/c9dt04725e 

Photothermal catalytic properties of layered titanium chalcogenide nanomaterials.
Okeil, S.; Yadav, S.; Bruns, M.; Zintler, A.; Molina-Luna, L.; Schneider, J. J.
2020. Dalton transactions, 49 (4), 1032–1047. doi:10.1039/c9dt03798e 

Lithium containing layered high entropy oxide structures.
Wang, J.; Cui, Y.; Wang, Q.; Wang, K.; Huang, X.; Stenzel, D.; Sarkar, A.; Azmi, R.; Bergfeldt, T.; Bhattacharya, S. S.; et al.
2020. Scientific reports, 10, Art.-Nr.: 18430. doi:10.1038/s41598-020-75134-1  

Composition and structure of magnetic high-temperature-phase, stable Fe-Au core-shell nanoparticles with zero-valent bcc Fe core.
Kamp, M.; Tymoczko, A.; Popescu, R.; Schürmann, U.; Nadarajah, R.; Gökce, B.; Rehbock, C.; Gerthsen, D.; Barcikowski, S.; Kienle, L.
2020. Nanoscale advances, 2 (9), 3912–3920. doi:10.1039/d0na00514b  

Chemical vapor deposited polymer layer for efficient passivation of planar perovskite solar cells.
Malekshahi Byranvand, M.; Behboodi-Sadabad, F.; Alrhman Eliwi, A.; Trouillet, V.; Welle, A.; Ternes, S.; Hossain, I. M.; Khan, M. R.; Schwenzer, J. A.; Farooq, A.; et al.
2020. Journal of materials chemistry / A, 8 (38), 20122–20132. doi:10.1039/d0ta06646j  

Two-Step Laser Post-Processing for the Surface Functionalization of Additively Manufactured Ti-6Al-4V Parts.
Solheid, J. S.; Wunsch, T.; Trouillet, V.; Weigel, S.; Scharnweber, T.; Seifert, H. J.; Pfleging, W.
2020. Materials, 13 (21), Art.-Nr.: 4872. doi:10.3390/ma13214872 

A polymer-based nano-resistive pulse sensor for detection of biomolecules: Fabrication and simulation.
Berkenbrock, J.-A.; Achenbach, S.; Wells, G.; Mail, M.; Scherer, T.
2020. IEEE Nano 2020 - The 20th IEEE International Conference on Nanotechnology, Virtual conference, 29-31 July 2020, Proceedings, 310–314, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/NANO47656.2020.9183598 

From LiNiO2 to Li2NiO3: Synthesis, Structures and Electrochemical Mechanisms in Li-Rich Nickel Oxides.
Bianchini, M.; Schiele, A.; Schweidler, S.; Sicolo, S.; Fauth, F.; Suard, E.; Indris, S.; Mazilkin, A.; Nagel, P.; Schuppler, S.; et al.
2020. Chemistry of materials, acs.chemm…er.0c02880. doi:10.1021/acs.chemmater.0c02880 

Mechanochemical synthesis: route to novel rock-salt-structured high-entropy oxides and oxyfluorides.
Lin, L.; Wang, K.; Azmi, R.; Wang, J.; Sarkar, A.; Botros, M.; Najib, S.; Cui, Y.; Stenzel, D.; Anitha Sukkurji, P.; et al.
2020. Journal of materials science, 55, 16879–16889. doi:10.1007/s10853-020-05183-4  

New Li${}_{0.8}$M${}_{0.1}$Ti${}_2$(PO${}_4$)${}_3$ (M=Co, Mg) Electrode Materials for Lithium-Ion Batteries: In Operando X-Ray Diffraction and Ex Situ X-ray Photoelectron Spectroscopy Investigations.
Aziam, H.; Darma, M. S. D.; Knapp, M.; Indris, S.; Ehrenberg, H.; Trouillet, V.; Saadoune, I.
2020. ChemElectroChem, 7 (17), 3637–3645. doi:10.1002/celc.202000965 

Pressure-Modulated Broadband Emission in 2D Layered Hybrid Perovskite-Like Bromoplumbate.
Gómez, V.; Klyatskaya, S.; Fuhr, O.; Kalytchuk, S.; Zbořil, R.; Kappes, M.; Lebedkin, S.; Ruben, M.
2020. Inorganic chemistry, 59 (17), 12431–12436. doi:10.1021/acs.inorgchem.0c01490 

Tailoring the protonic conductivity of porous yttria-stabilized zirconia thin films by surface modification.
Celik, E.; Negi, R. S.; Bastianello, M.; Boll, D.; Mazilkin, A.; Brezesinski, T.; Elm, M. T.
2020. Physical chemistry, chemical physics, 22 (20), 11519–11528. doi:10.1039/d0cp01619e 

Lithographic Performance of Aryl Epoxy Thermoset Resins as Negative Tone Photoresist for Microlithography.
Vlnieska, V.; Zakharova, M.; Mikhaylov, A.; Kunka, D.
2020. Polymers, 12 (10), 2359. doi:10.3390/polym12102359  

Morphology–transport relationships for SBA-15 and KIT-6 ordered mesoporous silicas.
Hochstrasser, J.; Svidrytski, A.; Höltzel, A.; Priamushko, T.; Kleitz, F.; Wang, W.; Kübel, C.; Tallarek, U.
2020. Physical chemistry, chemical physics, 22 (20), 11314–11326. doi:10.1039/d0cp01861a 

Pyridine N-oxide promoted hydrosilylation of carbonyl compounds catalyzed by [PSiP]-pincer iron hydrides.
Chang, G.; Zhang, P.; Yang, W.; Xie, S.; Sun, H.; Li, X.; Fuhr, O.; Fenske, D.
2020. Dalton transactions, 49 (27), 9349–9354. doi:10.1039/D0DT00392A 

Microstructural properties and peritectic reactions in a binary Co–Sn alloy by means of scanning electron microscopy and atom probe tomography.
Khushaim, M.; Alahmari, F.; Kattan, N.; Chassaing, D.; Boll, T.
2020. Materials Research Express, 7 (8), Art.Nr. 086508. doi:10.1088/2053-1591/abad04  

Synthesis of novel bisphosphorylimides based on Staudinger reaction.
Weber, L.; Weinert, M.; Goedderz, D.; Fuhr, O.; Döring, M.
2020. Arkivoc, 2020 (6), Art. Nr.: A25. doi:10.24820/ARK.5550190.P011.150  

In-Process Digital Monitoring of Additive Manufacturing: Proposed Machine Learning Approach and Potential Implications on Sustainability.
Charles, A.; Salem, M.; Moshiri, M.; Elkaseer, A.; Scholz, S. G.
2020. Sustainable Design and Manufacturing 2020 – Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020), 9-11 September 2020. Ed.: S. Scholz, 297–306, Springer. doi:10.1007/978-981-15-8131-1_27 

Impact of Nonplanar 3D Printing on Surface Roughness and Build Time in Fused Filament Fabrication.
Elkaseer, A.; Müller, T.; Rabsch, D.; Scholz, S. G.
2020. Sustainable Design and Manufacturing 2020 – Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020), 9-11 September 2020. Ed.: S. Scholz, 285–295, Springer. doi:10.1007/978-981-15-8131-1_26 

An Industry 4.0 framework for tooling production using metal additive manufacturing-based first-time-right smart manufacturing system.
Moshiri, M.; Charles, A.; Elkaseer, A.; Scholz, S.; Mohanty, S.; Tosello, G.
2020. Procedia CIRP, 93, 32–37. doi:10.1016/j.procir.2020.04.151 

Stakeholder-Driven Conceptualization of Open Innovation Approaches in the SYNERGY Project.
Fauth, J.; Marquardt, C.; Di Bari, G.; Raule, N.; Ronco, J. L.; Scholz, S. G.
2020. Sustainable Design and Manufacturing 2020 – Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020). Ed.: S. Scholz, 307–317, Springer. doi:10.1007/978-981-15-8131-1_28 

Flash Solid–Solid Synthesis of Silicon Oxide Nanorods.
Yan, X.; Sun, W.; Wang, W.; Duchesne, P. N.; Deng, X.; He, J.; Kübel, C.; Li, R.; Yang, D.; Ozin, G. A.
2020. Small, 16 (35), Art.-Nr.: 2001435. doi:10.1002/smll.202001435 

First-time synthesis of a magnetoelectric core-shell composite via conventional solid-state reaction.
Henrichs, L. F.; Mu, X.; Scherer, T.; Gerhards, U.; Schuppler, S.; Nagel, P.; Merz, M.; Kübel, C.; Fawey, M. H.; Hansen, T. C.; et al.
2020. Nanoscale, 12 (29), 15677–15686. doi:10.1039/d0nr02475a 

Vortex nucleation and propagation in magnetic double-wedges and semi-squares for reliable quaternary storage systems.
Sudsom, D.; Blachowicz, T.; Hahn, L.; Ehrmann, A.
2020. Journal of magnetism and magnetic materials, 514, Art.-Nr.: 167294. doi:10.1016/j.jmmm.2020.167294 

Enhancing the Electrochemical Performance of LiNi${}_{0.70}$Co${}_{0.15}$Mn${}_{0.15}$O${}_2$Cathodes Using a Practical Solution-Based Al${}_2$O${}_3$Coating.
Negi, R. S.; Culver, S. P.; Mazilkin, A.; Brezesinski, T.; Elm, M. T.
2020. ACS applied materials & interfaces, 12 (28), 31392–31400. doi:10.1021/acsami.0c06484 

Multi‐Electron Reactions enabled by Anion‐Based Redox Chemistry for High‐Energy Multivalent Rechargeable Batteries.
Zhenyou, L.; Bhaghavathi, P. V.; Jankowski, P.; Njel, C.; Roy, A.; Vegge, T.; Maibach, J.; Garcia Lastra, J. M.; Fichtner, M.; Zhao-Karger, Z.
2020. Angewandte Chemie, 132 (28), 11580–11587. doi:10.1002/ange.202002560|  

Phase Transformations in Nd-Fe-B-based Alloys under High Pressure Torsion at Different Temperatures.
Straumal, B. B.; Mazilkin, A. A.; Protasova, S. G.; Kilmametov, A. R.; Druzhinin, A. V.; Baretzky, B.
2020. JETP letters, 112, 37–44. doi:10.1134/S0021364020130020 

New Photosensitizers Based on Heteroleptic Cu${}^I$ Complexes and CO${}_2$ Photocatalytic Reduction with [Ni${}^{II}$(cyclam)]Cl${}_2$.
Gracia, L.; Luci, L.; Bruschi, C.; Sambri, L.; Weis, P.; Fuhr, O.; Bizzarri, C.
2020. Chemistry - a European journal, 26 (44), 9929–9937. doi:10.1002/chem.202001279  

Site-Specific Controlled Growth of Coiled Lambda-Shaped Carbon Nanofibers for Potential Application in Catalyst Support and Nanoelectronics.
Lutz, C.; Bog, U.; Thelen, R.; Syurik, J.; Malik, S.; Greiner, C.; Hoelscher, H.; Hirtz, M.
2020. ACS applied nano materials. doi:10.1021/acsanm.0c01374 

Solution-processed amorphous yttrium aluminium oxide YAlxOy and aluminum oxide AlxOy, and their functional dielectric properties and performance in thin-film transistors†.
Koslowski, N.; Trouillet, V.; Schneider, J. J.
2020. Journal of materials chemistry / C, 8 (25), 8521–8530. doi:10.1039/D0TC01876G 

Eight Weeks Later - The Unprecedented Rise of 3D Printing during the COVID-19 Pandemic : a Case Study, Lessons Learned, and Implications on the Future of Global Decentralized Manufacturing.
Mueller, T.; Elkaseer, A.; Charles, A.; Fauth, J.; Rabsch, D.; Scholz, A.; Marquardt, C.; Nau, K.; Scholz, S. G.
2020. Applied Sciences, 10 (12), 4135. doi:10.3390/app10124135  

New frontier in printed thermoelectrics: Formation of β-Ag${}_2$Se through thermally stimulated dissociative adsorption leads to high ZT.
Mallick, M. M.; Rösch, A. G.; Franke, L.; Gall, A.; Ahmad, S.; Gesswein, H.; Mazilkin, A.; Kuebel, C.; Lemmer, U.
2020. Journal of materials chemistry / A, 8 (32), 16366–16375. doi:10.1039/D0TA05859A  

Photo-induced copper-mediated (meth)acrylate polymerization towards graphene oxide and reduced graphene oxide modification.
Railian, S.; Haven, J. J.; Maes, L.; De Sloovere, D.; Trouillet, V.; Welle, A.; Adriaensens, P.; Van Bael, M. K.; Hardy, A.; Deferme, W.; et al.
2020. European polymer journal, 134, Article No. 109810. doi:10.1016/j.eurpolymj.2020.109810 

Morphology, structure, and composition of sulfidized silver nanoparticles and their aggregation dynamics in river water.
Metreveli, G.; David, J.; Schneider, R.; Kurtz, S.; Schaumann, G. E.
2020. The science of the total environment, 739, Article No.139989. doi:10.1016/j.scitotenv.2020.139989 

First results from in situ transmission electron microscopy studies of all-solid-state fluoride ion batteries.
Fawey, M. H.; Chakravadhanula, V. S. K.; Munnangi, A. R.; Rongeat, C.; Hahn, H.; Fichtner, M.; Kübel, C.
2020. Journal of power sources, 466, Article: 228283. doi:10.1016/j.jpowsour.2020.228283 

Effect of laser structured micro patterns on the polyvinyl butyral/oxide/steel interface stability.
Hagen, C. H. M.; Knudsen, O. Ø.; Zavieh, A. H.; Pfleging, W.
2020. Progress in organic coatings, 147, Article: 105766. doi:10.1016/j.porgcoat.2020.105766  

Development of an Array of Compound Refractive Lenses for Sub-Pixel Resolution, Large Field of View, and Time-Saving in Scanning Hard X-ray Microscopy.
Mamyrbayev, T.; Opolka, A.; Ershov, A.; Gutekunst, J.; Meyer, P.; Ikematsu, K.; Momose, A.; Last, A.
2020. Applied Sciences, 10 (12), Art.Nr.: 4132. doi:10.3390/app10124132  

On the chemical and microstructural requirements for the pesting-resistance of Mo-Si-Ti alloys.
Obert, S.; Kauffmann, A.; Seils, S.; Schellert, S.; Weber, M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2020. Journal of materials research and technology, 9 (4), 8556–8567. doi:10.1016/j.jmrt.2020.06.002  

The Formation of the ω Phase in the Titanium–iron System under Shear Deformation.
Straumal, B. B.; Kilmametov, A. R.; Mazilkin, A. A.; Gornakova, A. S.; Fabrichnaya, O. B.; Kriegel, M. J.; Rafaja, D.; Bulatov, M. F.; Nekrasov, A. N.; Baretzky, B.
2020. JETP letters, 111, 568–574. doi:10.1134/S0021364020100033 

Horsefly reactions to black surfaces: attractiveness to male and female tabanids versus surface tilt angle and temperature.
Horváth, G.; Pereszlényi, Á.; Egri, Á.; Fritz, B.; Guttmann, M.; Lemmer, U.; Gomard, G.; Kriska, G.
2020. Parasitology research, 119, 2399–2409. doi:10.1007/s00436-020-06702-7  

Hybrid multi-chip assembly of optical communication engines by in situ 3D nano-lithography.
Blaicher, M.; Billah, M. R.; Kemal, J.; Hoose, T.; Marin-Palomo, P.; Hofmann, A.; Kutuvantavida, Y.; Kieninger, C.; Dietrich, P.-I.; Lauermann, M.; et al.
2020. Light, 9 (1), 71. doi:10.1038/s41377-020-0272-5  

Experiment-Based Process Modeling and Optimization for High-Quality and Resource-Efficient FFF 3D Printing.
Elkaseer, A.; Schneider, S.; Scholz, S. G.
2020. Applied Sciences, 10 (8), Article: 2899. doi:10.3390/app10082899  

Dimensional Errors Due to Overhanging Features in Laser Powder Bed Fusion Parts Made of Ti-6Al-4V.
Charles, A.; Elkaseer, A.; Thijs, L.; Scholz, S. G.
2020. Applied Sciences, 10 (7), Article: 2416. doi:10.3390/app10072416  

The Crystal Structure of a RAS (N–CH${}_3$-2-NH${}_2$-5-Cl–Py)(TCNQ)(CH${}_3$CN) Solvate.
Starodub, T. N.; Fenske, D.; Fuhr, O.; Kazheva, O. N.; Starodub, V. A.
2020. Revista Mexicana de agronegocios, 65 (2), 242–246. doi:10.1134/S1063774520020248 

Advances in microcellular injection moulding.
Llewelyn, G.; Rees, A.; Griffiths, C. A.; Scholz, S. G.
2020. Journal of cellular plastics, 56 (6), 646–674. doi:10.1177/0021955X20912207 

Elemental analysis of commercial zirconia dental implants - Is “metal-free” devoid of metals?.
Gross, C.; Bergfeldt, T.; Fretwurst, T.; Rothweiler, R.; Nelson, K.; Stricker, A.
2020. Journal of the mechanical behavior of biomedical materials, 107, Art.-Nr. 103759. doi:10.1016/j.jmbbm.2020.103759  

Soft-Lithography of Polyacrylamide Hydrogels Using Microstructured Templates: Towards Controlled Cell Populations on Biointerfaces.
Díaz Lantada, A.; Mazarío Picazo, N.; Guttmann, M.; Wissmann, M.; Schneider, M.; Worgull, M.; Hengsbach, S.; Rupp, F.; Bade, K.; Plaza, G. R.
2020. Materials, 13 (7), 1586. doi:10.3390/ma13071586  

In Situ X-ray Diffraction and X-ray Absorption Spectroscopic Studies of a Lithium-Rich Layered Positive Electrode Material: Comparison of Composite and Core-Shell Structures.
Ehi-Eromosele, C. O.; Indris, S.; Bramnik, N. N.; Sarapulova, A.; Trouillet, V.; Pfaffman, L.; Melinte, G.; Mangold, S.; Darma, M. S. D.; Knapp, M.; et al.
2020. ACS applied materials & interfaces, 12 (12), 13852–13868. doi:10.1021/acsami.9b21061 

Upscaling the fabrication routine of bioreplicated rose petal light harvesting layers for photovoltaic modules.
Fritz, B.; Hünig, R.; Guttmann, M.; Schneider, M.; Reza, K. M. S.; Salomon, O.; Jackson, P.; Powalla, M.; Lemmer, U.; Gomard, G.
2020. Solar energy, 201, 666–673. doi:10.1016/j.solener.2020.03.020 

The Influence of the Gold Particle Size on the Catalytic Oxidation of 5-(Hydroxymethyl)furfural.
Schade, O.; Dolcet, P.; Nefedov, A.; Huang, X.; Saraçi, E.; Wöll, C.; Grunwaldt, J.-D.
2020. Catalysts, 10 (3), Article: 342. doi:10.3390/catal10030342  

Fabrication and Evaluation Methods of Micro-structured Surfaces for Droplet Impact Experiments.
Foltyn, P.; Guttmann, M.; Schneider, M.; Fest-Santini, S.; Wildenschild, D.; Weigand, B.
2020. Droplet Interactions and Spray Processes. Ed.: G. Lamanna, 71–86, Springer Nature. doi:10.1007/978-3-030-33338-6_6 

A designed and potentially decadentate ligand for use in lanthanide(III) catalysed biomass transformations: targeting diastereoselective trans-4,5-diaminocyclopentenone derivatives.
Peewasan, K.; Merkel, M. P.; Fuhr, O.; Powell, A. K.
2020. Dalton transactions, 49 (7), 2331–2336. doi:10.1039/D0DT00183J  

Gassing Behavior of High‐Entropy Oxide Anode and Oxyfluoride Cathode Probed Using Differential Electrochemical Mass Spectrometry.
Breitung, B.; Wang, Q.; Schiele, A.; Tripković, Đ.; Sarkar, A.; Velasco, L.; Wang, D.; Bhattacharya, S. S.; Hahn, H.; Brezesinski, T.
2020. Batteries & supercaps, 3 (4), 361–369. doi:10.1002/batt.202000010  

Influence of electronically conductive additives on the cycling performance of argyrodite-based all-solid-state batteries.
Strauss, F.; Stepien, D.; Maibach, J.; Pfaffmann, L.; Indris, S.; Hartmann, P.; Brezesinski, T.
2020. RSC Advances, 10 (2), 1114–1119. doi:10.1039/c9ra10253a  

Laminated Perovskite Photovoltaics: Enabling Novel Layer Combinations and Device Architectures.
Schmager, R.; Roger, J.; Schwenzer, J. A.; Schackmar, F.; Abzieher, T.; Malekshahi Byranvand, M.; Abdollahi Nejand, B.; Worgull, M.; Richards, B. S.; Paetzold, U. W.
2020. Advanced functional materials, 30 (9), Art. Nr.: 1907481. doi:10.1002/adfm.201907481  

Advanced Bifunctional Oxygen Reduction and Evolution Electrocatalyst Derived from Surface-Mounted Metal-Organic Frameworks.
Fischer, R. A.; Li, W.; Xue, S.; Watzele, S.; Hou, S.; Fichtner, J.; Semrau, A. L.; Zhou, L.; Welle, A.
2020. Angewandte Chemie / International edition, 59 (14), 5837–5843. doi:10.1002/anie.201916507  

Development of stacked conductive templates for electroforming of multi-level metallic micro components.
Piotter, V.; Klein, A.; Plewa, K.; Guttmann, M.; Winkler, F.
2020. Microsystem technologies, 26, 1585–1590. doi:10.1007/s00542-019-04699-3 

Defect Creation in Surface-Mounted Metal–Organic Framework Thin Films.
Wang, Z.; Henke, S.; Paulus, M.; Welle, A.; Fan, Z.; Rodewald, K.; Rieger, B.; Fischer, R. A.
2020. ACS applied materials & interfaces, 12 (2), 2655–2661. doi:10.1021/acsami.9b18672 

Laser polishing of additively manufactured Ti-6Al-4V - Microstructure evolution and material properties.
Solheid, J.; Mohanty, S.; Bayat, M.; Wunsch, T.; Weidler, P. G.; Seifert, H. J.; Pfleging, W.
2020. Journal of laser applications, 32, 022019. doi:10.2351/7.0000065  

3D-Printed Scanning-Probe Microscopes with Integrated Optical Actuation and Read-Out.
Dietrich, P.-I.; Göring, G.; Trappen, M.; Blaicher, M.; Freude, W.; Schimmel, T.; Hölscher, H.; Koos, C.
2020. Small, 16 (2), Article no: 1904695. doi:10.1002/smll.201904695  

Bio-inspired interfaces for easy-to-recycle lithium-ion batteries.
Jin, C.; Yang, Z.; Li, J.; Zheng, Y.; Pfleging, W.; Tang, T.
2020. Extreme mechanics letters, 34, Article no: 100594. doi:10.1016/j.eml.2019.100594 

Field experiments evaluating a biomimetic shark-inspired (BioS) subsoiler for tillage resistance reduction.
Wang, Y.; Li, N.; Ma, Y.; Tong, J.; Pfleging, W.; Sun, J.
2020. Soil & tillage research, 196, Article No.104432. doi:10.1016/j.still.2019.104432 

Methane Decomposition Over Modified Carbon Fibers as Effective Catalysts for Hydrogen Production.
Sisáková, K.; Oriňak, A.; Oriňaková, R.; Strečková, M.; Patera, J.; Welle, A.; Kostecká, Z.; Girman, V.
2020. Catalysis letters, 150, 781–793. doi:10.1007/s10562-019-02962-w 

Magnetic properties of iron clusters in Sc₇₅Fe₂₅ nanoglass.
Ghafari, M.; Mu, X.; Bednarcik, J.; Hutchison, W. D.; Gleiter, H.; Campbell, S. J.
2020. Journal of magnetism and magnetic materials, 494, 165819. doi:10.1016/j.jmmm.2019.165819 

Software Toolkit for Visualization and Process Selection for Modular Scalable Manufacturing of 3D Micro-Devices.
Scholz, S.; Elkaseer, A.; Salem, M.; Hagenmeyer, V.
2020. Information Systems Architecture and Technology: Proceedings of 40th Anniversary International Conference on Information Systems Architecture and Technology – ISAT 2019. Ed.: L. Borzemski, 160–172, Springer International Publishing. doi:10.1007/978-3-030-30440-9_16 

Laser-assisted surface processing for functionalization of polymers on micro- and nano-scale.
Rakebrandt, J.-H.; Zheng, Y.; Besser, H.; Scharnweber, T.; Seifert, H. J.; Pfleging, W.
2020. Microsystem technologies, 26, 1085–1091. doi:10.1007/s00542-019-04633-7 

Recrystallisation towards a single texture component in heavily cold rolled tungsten (W) sheets and its impact on micromechanics.
Reiser, J.; Bonnekoh, C.; Karcher, T.; Pfleging, W.; Weygand, D.; Hoffmann, A.
2020. International journal of refractory metals & hard materials, 86, Article: 105084. doi:10.1016/j.ijrmhm.2019.105084 

Study of indium tin oxide–MoS interface by atom probe tomography.
Ramos, M.; Nogan, J.; Boll, T.; Kauffmann-Weiss, S.; Rodriguez-Gonzalez, C. A.; Enriquez-Carrejo, J. L.; Heilmaier, M.
2019. MRS communications, 9 (4), 1261–1266. doi:10.1557/mrc.2019.150 

Photo-Cross-Linkable Polymer Inks for Solution-Based OLED Fabrication.
Kunz, S. V.; Cole, C. M.; Welle, A.; Shaw, P. E.; Sonar, P.; Thoebes, N.-P.; Baumann, T.; Yambem, S. D.; Blasco, E.; Blinco, J. P.; et al.
2019. Macromolecules, 52 (23), 9105–9113. doi:10.1021/acs.macromol.9b02030 

Siloxane-functionalised surface patterns as templates for the ordered deposition of thin lamellar objects.
Hoffmann, J.; Gamboa, S. M.; Hofmann, A.; Gliemann, H.; Welle, A.; Wacker, I.; Schröder, R. R.; Ness, L.; Hagenmeyer, V.; Gengenbach, U.
2019. Scientific reports, 9 (1), Article no: 17952. doi:10.1038/s41598-019-54507-1  

Super-Resolution Scanning Transmission X-Ray Imaging Using Single Biconcave Parabolic Refractive Lens Array.
Mamyrbayev, T.; Ikematsu, K.; Meyer, P.; Ershov, A.; Momose, A.; Mohr, J.
2019. Scientific reports, 9 (1), Article: 14366. doi:10.1038/s41598-019-50869-8  

Nickel@Siloxene catalytic nanosheets for high-performance CO2 methanation.
Yan, X.; Sun, W.; Fan, L.; Duchesne, P. N.; Wang, W.; Kübel, C.; Wang, D.; Kumar, S. G. H.; Li, Y. F.; Tavasoli, A.; et al.
2019. Nature Communications, 10, 2608. doi:10.1038/s41467-019-10464-x 

Effect of Low-Temperature Al2O3 ALD Coating on Ni-Rich Layered Oxide Composite Cathode on the Long-Term Cycling Performance of Lithium-Ion Batteries.
Neudeck, S.; Mazilkin, A.; Reitz, C.; Hartmann, P.; Janek, J.; Brezesinski, T.
2019. Scientific reports, 9 (1), 5328. doi:10.1038/s41598-019-41767-0 

Talbot-Lau x-ray phase-contrast setup for fast scanning of large samples.
Seifert, M.; Ludwig, V.; Kaeppler, S.; Horn, F.; Meyer, P.; Pelzer, G.; Rieger, J.; Sand, D.; Michel, T.; Mohr, J.; et al.
2019. Scientific reports, 9 (1), Article no: 4199. doi:10.1038/s41598-018-38030-3  

Microcharacterization of Interface Oxide Layer on Laser-Structured Silicon Surfaces of Plated Ni–Cu Solar Cells.
Büchler, A.; Grübel, B.; Arya, V.; Weingärtner, T.; Hähnel, A.; Naumann, V.; Bartsch, J.; Glatthaar, M.; Kluska, S.
2019. IEEE journal of photovoltaics, 9 (6), 1532–1540. doi:10.1109/JPHOTOV.2019.2938306 

Fabrication of α-FeSi2 nanowhiskers and nanoblades via electron beam physical vapor deposition.
Huang, W.; Srot, V.; Wagner, J.; Richter, G.
2019. Materials and design, 182, Article no: 108098. doi:10.1016/j.matdes.2019.108098  

MnO₂ and Reduced Graphene Oxide as Bifunctional Electrocatalysts for Li–O₂ Batteries.
Zhu, L.; Scheiba, F.; Trouillet, V.; Georgian, M.; Fu, Q.; Sarapulpva, A.; Sigel, F.; Hua, W.; Ehrenberg, H.
2019. ACS applied energy materials, 2 (10), 7121–7131. doi:10.1021/acsaem.9b01047 

Aptamer Conformation-Cooperated Enzyme-Assisted Surface-Enhanced Raman Scattering Enabling Ultrasensitive Detection of Cell Surface Protein Biomarkers in Blood Samples.
Li, Y.; Fang, Q.; Miao, X.; Zhang, X.; Zhao, Y.; Yan, J.; Zhang, Y.; Wu, R.; Nie, B.; Hirtz, M.; et al.
2019. ACS sensors, 4 (10), 2605–2614. doi:10.1021/acssensors.9b00604 

Competing Electronic Phases near the Onset of Superconductivity in Hole-doped SrFe₂As₂.
Wang, L.; He, M.; Scherer, D. D.; Hardy, F.; Schweiss, P.; Wolf, T.; Merz, M.; Andersen, B. M.; Meingast, C.
2019. Journal of the Physical Society of Japan, 88, Art. Nr.: 104710. doi:10.7566/jpsj.88.104710 

Mapping the Pore Architecture of Structured Catalyst Monoliths from Nanometer to Centimeter Scale with Electron and X-ray Tomographies.
Becher, J.; Sheppard, T. L.; Fam, Y.; Baier, S.; Wang, W.; Wang, D.; Kulkarni, S.; Keller, T. F.; Lyubomirskiy, M.; Brueckner, D.; et al.
2019. The journal of physical chemistry <Washington, DC> / C, 123 (41), 25197–25208. doi:10.1021/acs.jpcc.9b06541  

Turning a Killing Mechanism into an Adhesion and Antifouling Advantage.
Dedisch, S.; Obstals, F.; Santos Pereira, A. de los; Bruns, M.; Jakob, F.; Schwaneberg, U.; Rodriguez-Emmenegger, C.
2019. Advanced materials interfaces, 6 (18), Art.-Nr.: 1900847. doi:10.1002/admi.201900847  

Impacts of layout, surface condition and alloying elements on diffusion welding of micro process devices (Einfluss von Layout, Oberflächenzustand und Legierungselementen auf das Diffusionsschweißen mikroverfahrenstechnischer Apparate).
Gietzelt, T.; Toth, V.; Weingärtner, T.
2019. Materials science and engineering technology, 50 (9), 1070–1084. doi:10.1002/mawe.201800197 

Investigation of conductive hybrid polymer composites reinforced with copper micro fibers and carbon nanotubes produced by injection molding.
Doagou-Rad, S.; Islam, A.; Antusch, S.; Jung, J.; Klein, A.; Plewa, K.; Piotter, V.
2019. Materials today / Communications, 20, Art.-Nr.: 100566. doi:10.1016/j.mtcomm.2019.100566 

Mapping structure and morphology of amorphous organic thin films by 4D-STEM pair distribution function analysis.
Mu, X.; Mazilkin, A. A.; Sprau, C.; Colsmann, A.; Kübel, C.
2019. Microscopy, 68 (4), 301–309. doi:10.1093/jmicro/dfz015 

Mechanism Study of Carbon Coating Effects on Conversion-Type Anode Materials in Lithium-Ion Batteries: Case Study of ZnMn₂O₄ and ZnO–MnO Composites.
Zhao, Z.; Tian, G.; Sarapulova, A.; Melinte, G.; Gómez-Urbano, J. L.; Li, C.; Liu, S.; Welter, E.; Etter, M.; Dsoke, S.
2019. ACS applied materials & interfaces, 11 (33), 29888–29900. doi:10.1021/acsami.9b08539 

Structural and Morphological Properties of Hybrid Heterostructures Based on GaN Grown on a Compliant por-Si(111) Substrate.
Seredin, P. V.; Goloshchapov, D. L.; Zolotukhin, D. S.; Lenshin, A. S.; Mizerov, A. M.; Arsentyev, I. N.; Leiste, H.; Rinke, M.
2019. Semiconductors, 53 (8), 1120–1130. doi:10.1134/S1063782619080165 

Design of Nanocomposite Injectable Hydrogels for Minimally Invasive Surgery.
Piantanida, E.; Alonci, G.; Bertucci, A.; De Cola, L.
2019. Accounts of chemical research, 52 (8), 2101–2112. doi:10.1021/acs.accounts.9b00114 

Solid-phase combinatorial synthesis using microarrays of microcompartments with light-induced on-chip cell screening.
Rosenfeld, A.; Brehm, M.; Welle, A.; Trouillet, V.; Heissler, S.; Benz, M.; Levkin, P. A.
2019. Materials Today Bio, 3, Article: 100022. doi:10.1016/j.mtbio.2019.100022  

Microstructure and corrosion behavior of laser induced periodic patterned titanium based alloy.
Kumari, R.; Pfleging, W.; Besser, H.; Majumdar, J. D.
2019. Optics & laser technology, 116, 196–213. doi:10.1016/j.optlastec.2019.03.017 

One step: In situ synthesis of ZnS/N and S co-doped carbon composites via salt templating for lithium-ion battery applications.
Ikram, S.; Müller, M.; Dsoke, S.; Rana, U. A.; Sarapulova, A.; Bauer, W.; Siddiqi, H. M.; Szabo, D. V.
2019. New journal of chemistry, 43 (33), 13038–13047. doi:10.1039/c9nj02488c  

Phase transitions in copper–silver alloys under high pressure torsion.
Straumal, B. B.; Kilmametov, A. R.; Kogtenkova, O. A.; Mazilkin, A. A.; Baretzky, B.; Korneva, A.; Zięba, P.
2019. International journal of materials research, 110 (7), 608–613. doi:10.3139/146.111784 

Suppression of twinning and enhanced electronic anisotropy of SrIrO₃ films.
Jaiswal, A. K.; Schneider, R.; Singh, R.; Fuchs, D.
2019. Applied physics letters, 115 (3), 031904. doi:10.1063/1.5110982 

Crystallographic ordering in a series of Al-containing refractory high entropy alloys Ta-Nb-Mo-Cr-Ti-Al.
Chen, H.; Kauffmann, A.; Seils, S.; Boll, T.; Liebscher, C. H.; Harding, I.; Kumar, K. S.; Szabo, D. V.; Schlabach, S.; Kauffmann-Weiss, S.; et al.
2019. Acta materialia. doi:10.1016/j.actamat.2019.07.001  

Micro-cone textures for improved light in-coupling and retroreflection-inspired light trapping at the front surface of solar modules.
Dottermusch, S.; Schmager, R.; Klampaftis, E.; Paetel, S.; Kiowski, O.; Ding, K.; Richards, B. S.; Paetzold, U. W.
2019. Progress in photovoltaics, 27 (7), 593–602. doi:10.1002/pip.3133 

Transport under confinement: Hindrance factors for diffusion in core-shell and fully porous particles with different mesopore space morphologies.
Reich, S.-J.; Svidrytski, A.; Höltzel, A.; Wang, W.; Kübel, C.; Hlushkou, D.; Tallarek, U.
2019. Microporous and mesoporous materials, 282, 188–196. doi:10.1016/j.micromeso.2019.02.036 

Electronic and optical properties of hybrid GaN/por-Si(111) heterostructures.
Seredin, P. V.; Goloshchapov, D. L.; Zolotukhin, D. S.; Len’shin, A. S.; Mizerov, A. M.; Arsent’ev, I. N.; Leiste, H.; Rinke, M.
2019. Quantum electronics, 49 (6), 545–551. doi:10.1070/QEL17036 

On the homogeneity of high entropy oxides: An investigation at the atomic scale.
Chellali, M. R.; Sarkar, A.; Nandam, S. H.; Bhattacharya, S. S.; Breitung, B.; Hahn, H.; Velasco, L.
2019. Scripta materialia, 166, 58–63. doi:10.1016/j.scriptamat.2019.02.039 

Top-down fabrication and transformation properties of vanadium dioxide nanostructures.
Rastjoo, S.; Wang, X.; Ludwig, A.; Kohl, M.
2019. Journal of applied physics, 125, 225104. doi:10.1063/1.5085322 

Zooming X-rays with a single rotation in X-ray prism zoom lenses (XPZL).
Jark, W.; Opolka, A.; Cecilia, A.; Last, A.
2019. Optics express, 27 (12), 16781. doi:10.1364/OE.27.016781  

Quality and parameter control of X-ray absorption gratings by angular X-ray transmission.
Gustschin, N.; Gustschin, A.; Meyer, P.; Viermetz, M.; Riederer, P.; Herzen, J.; Mohr, J.; Pfeifferark, F.
2019. Optics express, 27 (11), 15943–15955. doi:10.1364/OE.27.015943 

Influence of secondary effects in the fabrication of submicron resist structures using deep x-ray lithography.
Faisal, A.; Beckenbach, T.; Mohr, J.; Meyer, P.
2019. Journal of micro/nanolithography, MEMS and MOEMS, 18 (2), Article no: 023502. doi:10.1117/1.JMM.18.2.023502  

Structural, optical and morphological properties of hybrid heterostructures on the basis of GaN grown on compliant substrate por-Si(111).
Seredin, P. V.; Lenshin, A. S.; Mizerov, A. M.; Leiste, H.; Rinke, M.
2019. Applied surface science, 476, 1049–1060. doi:10.1016/j.apsusc.2019.01.239 

X-ray fluorescence nano-imaging of long-term operated solid oxide electrolysis cells.
Villanova, J.; Schlabach, S.; Brisse, A.; Léon, A.
2019. Journal of power sources, 421, 100–108. doi:10.1016/j.jpowsour.2019.02.084 

Controversial discussion on the existence of the Hf and Zr monoborides and experimental proof by atom probe tomography.
Bolbut, V.; Seils, S.; Boll, T.; Chassaing, D.; Krüger, M.
2019. Materialia, 6, Art.-Nr.: 100322. doi:10.1016/j.mtla.2019.100322 

2D lens array for multi-contrast X-ray imaging.
Mikhaylov, A.; Reich, S.; Plech, A.; Zakharova, M.; Vlnieska, V.; Kunka, D.
2019. EUV and X-ray Optics: Synergy between Laboratory and Space VI. Ed.: R. Hudec, Artice no: 1103208, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2520687 

Microstructural evolution during creep of lamellar eutectoid and off-eutectoid FeAl/FeAl2 alloys.
Schmitt, A.; Kumar, K. S.; Kauffmann, A.; Heilmaier, M.
2019. Intermetallics, 107, 116–125. doi:10.1016/j.intermet.2019.01.015  

Catalytic Oxidation of Methoxy Substituted Benzyl Alcohols as Model for Lignin Valorisation.
Stucchi, M.; Cattaneo, S.; Cappella, A.; Wang, W.; Wang, D.; Villa, A.; Prati, L.
2019. Catalysis today, 357, 15–21. doi:10.1016/j.cattod.2019.03.022 

CPW fed grid dielectric resonator antennas with enhanced gain and bandwidth.
Mazhar, W.; Klymyshyn, D. M.; Tayfeh Aligodarz, M.; Ganguly, S.; Qureshi, A. A.; Boerner, M.
2019. International journal of RF and microwave computer-aided engineering, 29 (3), Art. Nr.: e21639. doi:10.1002/mmce.21639 

Functionalization of multi-walled carbon nanotubes with indazole.
Jurzinsky, T.; Gomez-Villa, E. D.; Kübler, M.; Bruns, M.; Elsässer, P.; Melke, J.; Scheiba, F.; Cremers, C.
2019. Electrochimica acta, 298, 884–892. doi:10.1016/j.electacta.2018.12.138 

Analysis of Carbon Nanotube Arrays for Their Potential Use as Adhesives Under Harsh Conditions as in Space Technology.
Lutz, C.; Ma, Z.; Thelen, R.; Syurik, J.; Il’in, O.; Ageev, O.; Jouanne, P.; Hölscher, H.
2019. Tribology letters, 67, Article: 10. doi:10.1007/s11249-018-1121-z 

Protection of Li metal anode by surface-coating of PVDF thin film to enhance the cycling performance of Li batteries.
Gao, Z.; Zhang, S.; Huang, Z.; Lu, Y.; Wang, W.; Wang, K.; Li, J.; Zhou, Y.; Huang, L.; Sun, S.
2019. Chinese chemical letters, 30 (2), 525–528. doi:10.1016/j.cclet.2018.05.016 

High‐Performance Ferroelectric–Dielectric Multilayered Thin Films for Energy Storage Capacitors.
Silva, J. P. B.; Silva, J. M. B.; Oliveira, M. J. S.; Weingärtner, T.; Sekhar, K. C.; Pereira, M.; Gomes, M. J. M.
2019. Advanced functional materials, 29 (6), Article: 1807196. doi:10.1002/adfm.201807196 

Light Driven Water Oxidation Coupled With C‐N Coupling Reaction Using a Hybrid Cu‐PW12O40 Based Soft‐Oxometalate.
Das, S.; Das, K.; Kübel, C.; Roy, S.
2019. ChemistrySelect, 4 (6), 1994–2000. doi:10.1002/slct.201803949 

1‐D Polymeric Iron(II) Thiolato Complexes: Synthesis, Structure, and Properties of ∞1[Fe(SR)2] (R = Ph, Mes), ∞1[Fe(NH3)(SPh)(µ‐SPh)] and ∞1[(µ‐SPh)Fe(NH3)2(µ‐SPh)2Fe(µ‐SPh)].
Eichhöfer, A.; Buth, G.
2019. European journal of inorganic chemistry, 2019 (5), 639–646. doi:10.1002/ejic.201801178 

Effect of composition, annealing temperature, and high pressure torsion on structure and hardness of Ti–V and Ti–V–Al alloys.
Gornakova, A. S.; Straumal, A. B.; Khodos, I. I.; Gnesin, I. B.; Mazilkin, A. A.; Afonikova, N. S.; Straumal, B. B.
2019. Journal of applied physics, 125 (8), 082522. doi:10.1063/1.5053937 

Influence of a por-Si Buffer Layer on the Optical Properties of Epitaxial InxGa1 –xN/Si(111) Heterostructures with a Nanocolumnar Film Morphology.
Seredin, P. V.; Goloshchapov, D. L.; Zolotukhin, D. S.; Lenshin, A. S.; Lukin, A. N.; Mizerov, A. M.; Nikitina, E. V.; Arsentyev, I. N.; Leiste, H.; Rinke, M.
2019. Semiconductors, 53 (1), 65–71. doi:10.1134/S1063782619010172 

Synthesis and Catalytic Activity of Iron Hydride Ligated with Bidentate N-Heterocyclic Silylenes for Hydroboration of Carbonyl Compounds.
Qi, X.; Zheng, T.; Zhou, J.; Dong, Y.; Zuo, X.; Li, X.; Sun, H.; Fuhr, O.; Fenske, D.
2019. Organometallics, 38 (2), 268–277. doi:10.1021/acs.organomet.8b00700 

Exposure-dependent refractive index of Nanoscribe IP-Dip photoresist layers.
Dottermusch, S.; Busko, D.; Langenhorst, M.; Paetzold, U. W.; Richards, B. S.
2019. Optics letters, 44 (1), 29. doi:10.1364/OL.44.000029 

Effect of repeated immersions and contamination on plastron stability in superhydrophobic surfaces.
Vüllers, F.; Peppou-Chapman, S.; Kavalenka, M. N.; Hölscher, H.; Neto, C.
2019. Physics of fluids, 31 (1), 012102. doi:10.1063/1.5064817 

X-ray zoom lens allows for energy scans in X-ray microscopy.
Kornemann, E.; Zhou, T.; Márkus, O.; Opolka, A.; Schülli, T. U.; Mohr, J.; Last, A.
2019. Optics express, 27 (1), 185–195. doi:10.1364/OE.27.000185  

Self-cleaning performance of superhydrophobic hot-embossed fluoropolymer films for photovoltaic modules.
Roslizar, A.; Dottermusch, S.; Vüllers, F.; Kavalenka, M. N.; Guttmann, M.; Schneider, M.; Paetzold, U. W.; Hölscher, H.; Richards, B. S.; Klampaftis, E.
2019. Solar energy materials & solar cells, 189, 188–196. doi:10.1016/j.solmat.2018.09.017 

Differentiation of γ′- and γ″- precipitates in Inconel 718 by a complementary study with small-angle neutron scattering and analytical microscopy.
Lawitzki, R.; Hassan, S.; Karge, L.; Wagner, J.; Wang, D.; Kobylinski, J. von; Krempaszky, C.; Hofmann, M.; Gilles, R.; Schmitz, G.
2019. Acta materialia, 163, 28–39. doi:10.1016/j.actamat.2018.10.014 

Constitution, oxidation and creep of eutectic and eutectoid Mo-Si-Ti alloys.
Schliephake, D.; Kauffmann, A.; Cong, X.; Gombola, C.; Azim, M.; Gorr, B.; Christ, H.-J.; Heilmaier, M.
2019. Intermetallics, 104, 133–142. doi:10.1016/j.intermet.2018.10.028  

Reduced surface effects in weakly interacting ZrO2 coated MnFe2O4 nanoparticles.
Zeb, F.; Ishaque, M.; Nadeem, K.; Kamran, M.; Krenn, H.; Szabo, D. V.; Brossmann, U.; Letofsky-Papst, I.
2019. Journal of magnetism and magnetic materials, 469, 580–586. doi:10.1016/j.jmmm.2018.09.013 

Towards stable and efficient electrolytes for room-temperature rechargeable calcium batteries.
Li, Z.; Fuhr, O.; Fichtner, M.; Zhao-Karger, Z.
2019. Energy & environmental science, 12 (12), 3496–3501. doi:10.1039/c9ee01699f  

Syntheses, Crystal Structure, Electrocatalytic, and Magnetic Properties of the Monolanthanide-Containing Germanotungstates [Ln(H${}_2$O)${}_n$GeW${}_{11}$O${}_{39}$]${}^{5-}$ (Ln = Dy, Er, n = 4,3).
Ibrahim, M.; Mbomekallé, I. M.; De Oliveira, P.; Baksi, A.; Carter, A. B.; Peng, Y.; Bergfeldt, T.; Malik, S.; Anson, C. E.
2019. ACS omega, 4 (26), 21873–21882. doi:10.1021/acsomega.9b02846  

Evaluation of click chemistry microarrays for immunosensing of alpha-fetoprotein (AFP).
Dadfar, S. M. M.; Sekula-Neuner, S.; Trouillet, V.; Liu, H.-Y.; Kumar, R.; Powell, A. K.; Hirtz, M.
2019. Beilstein journal of nanotechnology, 10, 2505–2515. doi:10.3762/bjnano.10.241  

Synthesis, Characterization, and Biological Properties of Steroidal Ruthenium(II) and Iridium(III) Complexes Based on the Androst-16-en-3-ol Framework.
Koch, V.; Meschkov, A.; Feuerstein, W.; Pfeifer, J.; Fuhr, O.; Nieger, M.; Schepers, U.; Bräse, S.
2019. Inorganic chemistry, 58 (23), 15917–15926. doi:10.1021/acs.inorgchem.9b02402 

Stabilizing Effect of a Hybrid Surface Coating on a Ni-Rich NCM Cathode Material in All-Solid-State Batteries.
Kim, A.-Y.; Strauss, F.; Bartsch, T.; Teo, J. H.; Hatsukade, T.; Mazilkin, A.; Janek, J.; Hartmann, P.; Brezesinski, T.
2019. Chemistry of materials, 31 (23), 9664–9672. doi:10.1021/acs.chemmater.9b02947 

NIR‐Emitting Gold Nanoclusters–Modified Gelatin Nanoparticles as a Bioimaging Agent in Tissue.
El‐Sayed, N.; Trouillet, V.; Clasen, A.; Jung, G.; Hollemeyer, K.; Schneider, M.
2019. Advanced healthcare materials, 8 (24), Article: 1900993. doi:10.1002/adhm.201900993  

Structure and Tensile Strength of Pure Cu after High Pressure Torsion Extrusion.
Nugmanov, D.; Mazilkin, A.; Hahn, H.; Ivanisenko, Y.
2019. Metals, 9 (10), Art.Nr.: 1081. doi:10.3390/met9101081 

Highly soluble fluorine containing Cu(i) AlkylPyrPhos TADF complexes.
Busch, J. M.; Zink, D. M.; Di Martino-Fumo, P.; Rehak, F. R.; Boden, P.; Steiger, S.; Fuhr, O.; Nieger, M.; Klopper, W.; Gerhards, M.; et al.
2019. Dalton transactions, 48 (41), 15687–15698. doi:10.1039/c9dt02447f  

Thin Films of Thermally Stable Ordered Mesoporous Rh₂O₃(I) for Visible-Light Photocatalysis and Humidity Sensing.
Dubraja, L. A.; Boll, D.; Reitz, C.; Wang, D.; Belić, D.; Mazilkin, A.; Breitung, B.; Hahn, H.; Elm, M. T.; Brezesinski, T.
2019. ACS applied nano materials, 2 (11), 7126–7133. doi:10.1021/acsanm.9b01654 

Combination of pulsed laser ablation and inert gas condensation for the synthesis of nanostructured nanocrystalline, amorphous and composite materials.
Bag, S.; Baksi, A.; Wang, D.; Kruk, R.; Benel, C.; Chellali, M. R.; Hahn, H.
2019. Nanoscale advances, 1 (11), 4513–4521. doi:10.1039/c9na00533a  

Ultrashort Pulsed Laser Surface Patterning of Titanium to Improve Osseointegration of Dental Implants.
Zwahr, C.; Welle, A.; Weingärtner, T.; Heinemann, C.; Kruppke, B.; Gulow, N.; Holthaus, M. große; Fabián Lasagni, A.
2019. Advanced engineering materials, 1900639. doi:10.1002/adem.201900639  

Reversible control of magnetism: On the conversion of hydrated FeF3 with Li to Fe and LiF.
Singh, R.; Witte, R.; Mu, X.; Brezesinski, T.; Hahn, H.; Kruk, R.; Breitung, B.
2019. Journal of materials chemistry / A, 7 (41), 24005–24011. doi:10.1039/c9ta08928d 

Lithium distribution in structured graphite anodes investigated by laser-induced breakdown spectroscopy.
Zheng, Y.; Pfäffl, L.; Seifert, H. J.; Pfleging, W.
2019. Applied Sciences, 9 (20), Article No.4218. doi:10.3390/app9204218  

Improved Capacity Retention of SiO${}_2$-Coated LiNi${}_{0.6}$Mn${}_{0.2}$Co${}_{0.2}$O${}_2$ Cathode Material for Lithium-Ion Batteries.
Lu, X.; Zhang, N.; Jahn, M.; Pfleging, W.; Seifert, H. J.
2019. Applied Sciences, 9 (18), 3671. doi:10.3390/app9183671  

Microstrain and electrochemical performance of garnet solid electrolyte integrated in a hybrid battery cell.
Botros, M.; Scherer, T.; Popescu, R.; Kilmametov, A.; Clemens, O.; Hahn, H.
2019. RSC Advances, 9 (53), 31102–31114. doi:10.1039/c9ra07091e  

The Role of Intragranular Nanopores in Capacity Fade of Nickel-Rich Layered Li(Ni${}_{1-x-y}$Co${}_x$Mn${}_y$)O${}_2$ Cathode Materials.
Ahmed, S.; Pokle, A.; Schweidler, S.; Beyer, A.; Bianchini, M.; Walther, F.; Mazilkin, A.; Hartmann, P.; Brezesinski, T.; Janek, J.; et al.
2019. ACS nano, 13 (9), 10694–10704. doi:10.1021/acsnano.9b05047 

The ultrafast laser ablation of Li(Ni${}_{0.6}$Mn${}_{0.2}$Co${}_{0.2}$)O${}_2$ electrodes with high mass loading.
Zhu, P.; Seifert, H. J.; Pfleging, W.
2019. Applied Sciences, 9 (19), Article: 4067. doi:10.3390/app9194067  

Influence of the Spatial Conformation of Charged Ligands on the Optical Properties of Gold Nanoclusters.
Porret, E.; Jourdan, M.; Gennaro, B.; Comby-Zerbino, C.; Bertorelle, F.; Trouillet, V.; Qiu, X.; Zoukimian, C.; Boturyn, D.; Hildebrandt, N.; et al.
2019. The journal of physical chemistry <Washington, DC> / C, 123 (43), 26705–26717. doi:10.1021/acs.jpcc.9b08492 

Investigation into Mechanical Degradation and Fatigue of High-Ni NCM Cathode Material: A Long-Term Cycling Study of Full Cells.
Schweidler, S.; De Biasi, L.; Garcia, G.; Mazilkin, A.; Hartmann, P.; Brezesinski, T.; Janek, J.
2019. ACS applied energy materials, 2 (10), 7375–7384. doi:10.1021/acsaem.9b01354 

The Multisensor Array Based on Grown-On-Chip Zinc Oxide Nanorod Network for Selective Discrimination of Alcohol Vapors at Sub-ppm Range.
Bobkov, A.; Varezhnikov, A.; Plugin, I.; Fedorov, F. S.; Trouillet, V.; Geckle, U.; Sommer, M.; Goffman, V.; Moshnikov, V.; Sysoev, V.
2019. Sensors, 19 (19), Article No.4265. doi:10.3390/s19194265  

Facilitating an International Research Experience Focused on Applied Nanotechnology and Surface Chemistry for American Undergraduate Students Collaborating with Mentors at a German Educational and Research Institution.
Wilson, C.; Hirtz, M.; Levkin, P. A.; Sutlief, A. L.; Holmes, A. E.
2019. Journal of chemical education, 96 (11), 2441–2449. doi:10.1021/acs.jchemed.9b00146 

Synthesis, oxide formation, properties and thin film transistor properties of yttrium and aluminium oxide thin films employing a molecular-based precursor route.
Koslowski, N.; Hoffmann, R. C.; Trouillet, V.; Bruns, M.; Foro, S.; Schneider, J. J.
2019. RSC Advances, 9 (54), 31386–31397. doi:10.1039/c9ra05348d  

Controlling biofilm formation with nitroxide functional surfaces.
Woehlk, H.; Trimble, M. J.; Mansour, S. C.; Pletzer, D.; Trouillet, V.; Welle, A.; Barner, L.; Hancock, R. E. W.; Barner-Kowollik, C.; Fairfull-Smith, K. E.
2019. Polymer chemistry, 10 (31), 4252–4258. doi:10.1039/c9py00690g 

Total Cost of Ownership for different state of the art FDM Machines.
Fauth, J.; Elkaseer, A.; Scholz, S. G.
2019. Sustainable Design and Manufacturing 2019 : Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19) - Budapest, Hungary, 4 - 5 July 2019. Ed.: P. Ball, 351–361, Springer 

Femtosecond Laser Processing of Thick Film Cathodes and Its Impact on Lithium-Ion Diffusion Kinetics.
Pfleging, W.; Gotcu, P.
2019. Applied Sciences, 9 (17), Article no: 3588. doi:10.3390/app9173588  

Magnetic anisotropy in trigonal planar Fe(ii) bis(trimethylsilyl)amido complexes of the type [Fe{N(SiMe₃)₂}₂L]—experiment and theory.
Bodenstein, T.; Eichhöfer, A.
2019. Dalton transactions, 48, 15699–15712. doi:10.1039/c9dt01702j  

Synthesis, Transfer, and Gas Separation Characteristics of MOF-Templated Polymer Membranes.
Schmitt, S.; Shishatskiy, S.; Krolla, P.; An, Q.; Begum, S.; Welle, A.; Hashem, T.; Grosjean, S.; Abetz, V.; Bräse, S.; et al.
2019. Membranes, 9 (10), Art. Nr.: 124. doi:10.3390/membranes9100124  

Nanocrystalline graphene at high temperatures: Insight into nanoscale processes.
Shyam Kumar, C. N.; Konrad, M.; Chakravadhanula, V. S. K.; Dehm, S.; Wang, D.; Wenzel, W.; Krupke, R.; Kübel, C.
2019. Nanoscale advances, 1 (7), 2485–2494. doi:10.1039/c9na00055k 

Aging of WE43 magnesium alloy after mechanical crushing and subsequent high pressure torsion.
Straumal, P. B.; Martynenko, N. S.; Mazilkin, A.; Kilmametov, A.; Baretzky, B.
2019. Pisʹma o materialach, 9 (3), 370–374. doi:10.22226/2410-3535-2019-3-370-374 

Understanding the Lithium Storage Mechanism in Core-Shell Fe${}_2$O${}_3$@C Hollow Nanospheres Derived from Metal-Organic Frameworks: An in operando Synchrotron Radiation Diffraction and in operando X-ray Absorption Spectroscopy Study.
Li, C.; Sarapulova, A.; Zhao, Z.; Fu, Q.; Trouillet, V.; Missiul, A.; Welter, E.; Dsoke, S.
2019. Chemistry of materials, 31 (15), 5633–5645. doi:10.1021/acs.chemmater.9b01504 

Raman scattering study of lattice and magnetic excitations in CrAs.
Sen, K.; Yao, Y.; Heid, R.; Omoumi, A.; Hardy, F.; Willa, K.; Merz, M.; Haghighirad, A. A.; Le Tacon, M.
2019. Physical review / B, 100 (10), Article: 104301. doi:10.1103/PhysRevB.100.104301 

Epoxy Resins for Negative Tone Photoresists.
Vlnieska, V.; Mikhaylov, A.; Zakharova, M.; Blasco, E.; Kunka, D.
2019. Polymers, 11 (9), Art.Nr.: 1457. doi:10.3390/polym11091457  

Towards quantitative treatment of electron pair distribution function.
Gorelik, T. E.; Neder, R.; Terban, M. W.; Lee, Z.; Mu, X.; Jung, C.; Jacob, T.; Kaiser, U.
2019. Acta crystallographica / B, 75, 532–549. doi:10.1107/S205252061900670X 

Liquid glass for photovoltaics: multi-functional front cover glass for solar modules.
Langenhorst, M.; Ritzer, D.; Kotz, F.; Risch, P.; Dottermusch, S.; Roslizar, A.; Schmager, R.; Richards, B. S.; Rapp, B. E.; Paetzold, U. W.
2019. ACS applied materials & interfaces, acsami.9b12896. doi:10.1021/acsami.9b12896 

Multi-anionic and -cationic compounds: new high entropy materials for advanced Li-ion batteries.
Wang, Q.; Sarkar, A.; Wang, D.; Velasco, L.; Azmi, R.; Bhattacharya, S. S.; Bergfeldt, T.; Düvel, A.; Heitjans, P.; Brezesinski, T.; et al.
2019. Energy & environmental science, 12 (8), 2433–2442. doi:10.1039/c9ee00368a  

Competition for impurity atoms between defects and solid solution during high pressure torsion.
Mazilkin, A. A.; Straumal, B. B.; Kilmametov, A. R.; Boll, T.; Baretzky, B.; Kogtenkova, O. A.; Korneva, A.; Zięba, P.
2019. Scripta materialia, 173, 46–50. doi:10.1016/j.scriptamat.2019.08.001 

Influence of current density on the adhesion of seedless electrodeposited copper layers on silicon.
Goncalves de Cerqueira Lima, F.; Mescheder, U.; Leiste, H.; Müller, C.
2019. Surface and coatings technology, 375, 554–564. doi:10.1016/j.surfcoat.2019.07.007 

Varying steps in hysteresis loops of Co square nano-frames.
Blachowicz, T.; Kosmalska, D.; Döpke, C.; Leiste, H.; Hahn, L.; Ehrmann, A.
2019. Journal of magnetism and magnetic materials, 491, Art.-Nr.: 165619. doi:10.1016/j.jmmm.2019.165619 

A Lithium‐Free Energy‐Storage Device Based on an Alkyne‐Substituted‐Porphyrin Complex.
Chen, Z.; Gao, P.; Wang, W.; Klyatskaya, S.; Zhao‐Karger, Z.; Wang, D.; Kübel, C.; Fuhr, O.; Fichtner, M.; Ruben, M.
2019. ChemSusChem, 12 (16), 3737–3741. doi:10.1002/CSSC.201901541  

On‐Surface Activation of Trimethylsilyl‐Terminated Alkynes on Coinage Metal Surfaces.
Zhang, L.; Zhang, Y.; Chen, Z.; Lin, T.; Paszkiewicz, M.; Hellwig, R.; Huang, T.; Ruben, M.; Barth, J. V.; Klappenberger, F.
2019. ChemPhysChem, 20 (18), 2382–2393. doi:10.1002/cphc.201900249 

Local order in Cr-Fe-Co-Ni: Experiment and electronic structure calculations.
Schönfeld, B.; Sax, C. R.; Zemp, J.; Engelke, M.; Boesecke, P.; Kresse, T.; Boll, T.; Al-Kassab, T.; Peil, O. E.; Ruban, A. V.
2019. Physical review / B, 99 (1), 014206. doi:10.1103/PhysRevB.99.014206 

Microscopic origin of highly enhanced current carrying capabilities of thin NdFeAs(O,F) films.
Kauffmann-Weiss, S.; Iida, K.; Tarantini, C.; Boll, T.; Schneider, R.; Ohmura, T.; Matsumoto, T.; Hatano, T.; Langer, M.; Meyer, S.; et al.
2019. Nanoscale Advances, 1–13. doi:10.1039/C9NA00147F  

Turn on of sky-blue thermally activated delayed fluorescence and circularly polarized luminescence (CPL): Via increased torsion by a bulky carbazolophane donor.
Sharma, N.; Spuling, E.; Mattern, C. M.; Li, W.; Fuhr, O.; Tsuchiya, Y.; Adachi, C.; Bräse, S.; Samuel, I. D. W.; Zysman-Colman, E.
2019. Chemical science, 10 (27), 6689–6696. doi:10.1039/c9sc01821b  

In Operando analysis of the charge storage mechanism in a conversion ZnCo₂O₄ anode and the application in flexible Li-ion batteries.
Zhao, Z.; Tian, G.; Trouillet, V.; Zhu, L.; Zhu, J.; Missiul, A.; Welter, E.; Dsoke, S.
2019. Inorganic chemistry frontiers, 6 (7), 1861–1872. doi:10.1039/c9qi00356h  

Quantum Tunneling Mediated Interfacial Synthesis of a Benzofuran Derivative.
Paintner, T.; Björk, J.; Du, P.; Klyatskaya, S.; Paszkiewicz, M.; Hellwig, R.; Uphoff, M.; Öner, M. A.; Cuniberto, E.; Deimel, P. S.; et al.
2019. Angewandte Chemie / International edition, 58 (33), 11285–11290. doi:10.1002/anie.201904030 

Elucidating the Structural Composition of a Fe–N–C Catalyst by Nuclear- and Electron-Resonance Techniques.
Wagner, S.; Auerbach, H.; Tait, C. E.; Martinaiou, I.; Kumar, S. C. N.; Kübel, C.; Sergeev, I.; Wille, H.-C.; Behrends, J.; Wolny, J. A.; et al.
2019. Angewandte Chemie / International edition, 58 (31), 10486–10492. doi:10.1002/anie.201903753 

Direct Conversion of CO₂ to Multi-Layer Graphene using Cu–Pd Alloys.
Molina-Jirón, C.; Chellali, M. R.; Kumar, C. N. S.; Kübel, C.; Velasco, L.; Hahn, H.; Moreno-Pineda, E.; Ruben, M.
2019. ChemSusChem, 12 (15), 3509–3514. doi:10.1002/cssc.201901404 

Evolution of microstructure and hardness in aluminum processed by High Pressure Torsion Extrusion.
Omranpour, B.; Ivanisenko, Y.; Kulagin, R.; Kommel, L.; Garcia Sanchez, E.; Nugmanov, D.; Scherer, T.; Heczel, A.; Gubicza, J.
2019. Materials science and engineering / A, 762, Article No.138074. doi:10.1016/j.msea.2019.138074 

Superior Magnetic Performance in FePt L1₀ Nanomaterials.
Son, K.; Ryu, G.; Jeong, H.-H.; Fink, L.; Merz, M.; Nagel, P.; Schuppler, S.; Richter, G.; Goering, E.; Schütz, G.
2019. Small, 15 (34), Article No.1902353. doi:10.1002/smll.201902353 

Photoiniferter surface grafting of poly(methyl acrylate) using xanthates.
Ramakers, G.; Rubens, M.; Krivcov, A.; Möbius, H.; Trouillet, V.; Welle, A.; Junkers, T.
2019. Journal of polymer science / A, 57 (18), 2002–2007. doi:10.1002/pola.29405 

High photoluminescence of shortwave infrared-emitting anisotropic surface charged gold nanoclusters.
Musnier, B.; Wegner, K. D.; Comby-Zerbino, C.; Trouillet, V.; Jourdan, M.; Häusler, I.; Antoine, R.; Coll, J.-L.; Resch-Genger, U.; Le Guével, X.
2019. Nanoscale, 11 (25), 12092–12096. doi:10.1039/C9NR04120F 

Quantifying Morphology and Diffusion Properties of Mesoporous Carbon from High-Fidelity 3D Reconstructions.
Wang, W.; Svidrytski, A.; Wang, D.; Villa, A.; Hahn, H.; Tallarek, U.; Kübel, C.
2019. Microscopy and microanalysis, 25 (4), 891–902. doi:10.1017/S1431927619014600 

An enhanced energy migration strategy in upconverting nanocrystals: Color-tuning with high quantum yield.
Hudry, D.; Busko, D.; Popescu, R.; Gerthsen, D.; Howard, I. A.; Richards, B. S.
2019. Journal of materials chemistry / C, 7 (24), 7371–7377. doi:10.1039/c9tc01567a 

Impact of particle size, oxidation state and capping agent of different cerium dioxide nanoparticles on the phosphate-induced transformations at different pH and concentration.
Romer, I.; Briffa, S. M.; Dasilva, Y. A. R.; Hapiuk, D.; Trouillet, V.; Palmer, R. E.; Valsami-Jones, E.
2019. PLOS ONE, 14 (6), Art.-Nr.: e0217483. doi:10.1371/journal.pone.0217483  

The coordination behavior of 2,3-bis(diphenylphosphino)maleic-phenylimide towards copper, silver, gold and palladium.
Wang, Y.; Eichhöfer, A.; Weigend, F.; Fenske, D.; Fuhr, O.
2019. Dalton transactions, 48 (20), 6863–6871. doi:10.1039/c8dt05003a  

Hetero-layered MoS${}_2$/C composites enabling ultrafast and durable Na storage.
Li, Z.; Liu, S.; Vinayan, B. P.; Zhao-Karger, Z.; Diemant, T.; Wang, K.; Behm, R. J.; Kübel, C.; Klingeler, R.; Fichtner, M.
2019. Energy storage materials, 21, 115–123. doi:10.1016/j.ensm.2019.05.042 

Oxygen Activity in Li-Rich Disordered Rock-Salt Oxide and the Influence of LiNbO${}_3$ Surface Modification on the Electrochemical Performance.
Cambaz, M. A.; Vinayan, B. P.; Geßwein, H.; Schiele, A.; Sarapuolva, A.; Diemant, T.; Mazilkin, A.; Brezesinski, T.; Behm, R. J.; Ehrenberg, H.; et al.
2019. Chemistry of materials, 31 (12), 4330–4340. doi:10.1021/acs.chemmater.8b04504  

In-situ TEM study of oxygen-modulated crystallization pathway in Ni-Zr metallic glass.
Liu, S. Y.; Cao, Q. P.; Mu, X.; Wang, D.; Wang, X. D.; Tang, Y.; Zhang, D. X.; Kübel, C.; Jiang, J. Z.
2019. Journal of alloys and compounds, 800, 254–260. doi:10.1016/j.jallcom.2019.06.020 

3D silicon/graphite composite electrodes for high-energy lithium-ion batteries.
Zheng, Y.; Seifert, H. J.; Shi, H.; Zhang, Y.; Kübel, C.; Pfleging, W.
2019. Electrochimica acta, 317, 502–508. doi:10.1016/j.electacta.2019.05.064 

On the Assessment of Thermo-mechanical Degradability of Multi-recycled ABS Polymer for 3D Printing Applications.
Charles, A.; Bassan, P. M.; Mueller, T.; Elkaseer, A.; Scholz, S. G.
2019. Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19), Budapest, Ungarn, 4 - 5 Juli 2019. Ed.: P. Ball, 363–373, Springer. doi:10.1007/978-981-13-9271-9_30 

Safe by Design in 3D printing.
Nau, K.; Scholz, S. G.
2019. Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19), Budapest, Ungarn, 4 - 5 Juli 2019. Ed.: P. Ball, 341–350, Springer. doi:10.1007/978-981-13-9271-9_28 

Chemical Nature of Microfluidically Synthesized AuPd Nanoalloys Supported on TiO₂.
Tofighi, G.; Yu, X.; Lichtenberg, H.; Doronkin, D. E.; Wang, W.; Wöll, C.; Wang, Y.; Grunwaldt, J.-D.
2019. ACS catalysis, 9 (6), 5462–5473. doi:10.1021/acscatal.9b00161  

Correlation of Interface Structure with Magnetic Exchange in a Hard/Soft Magnetic Model Nanostructure.
Sabet, S.; Moradabadi, A.; Gorji, S.; Fawey, M. H.; Hildebrandt, E.; Radulov, I.; Wang, D.; Zhang, H.; Kübel, C.; Alff, L.
2019. Physical review applied, 11 (5), 054078. doi:10.1103/PhysRevApplied.11.054078 

Improved Tensile Ductility by Severe Plastic Deformation for Nano-Structured Metallic Glass.
Dong, Y.; Liu, S.; Biskupek, J.; Cao, Q.; Wang, X.; Jiang, J.-Z.; Wunderlich, R.; Fecht, H.-J.
2019. Materials, 12 (10), 1611. doi:10.3390/ma12101611  

High-throughput thermal replication of transparent fused silica glass.
Kotz, F.; Striegel, A.; Schneider, N.; Worgull, M.; Rapp, B. E.
2019. Microfluidics, BioMEMS, and Medical Microsystems XVII: SPIE Bios, 2-4 February 2019, San Francisco, CA. Ed.: B.L. Gray, Article no: 1087503, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2506155 

A New Class of Rigid Multi(azobenzene) Switches Featuring Electronic Decoupling: Unravelling the Isomerization in Individual Photochromes.
Galanti, A.; Santoro, J.; Mannancherry, R.; Duez, Q.; Diez-Cabanes, V.; Valášek, M.; De Winter, J.; Cornil, J.; Gerbaux, P.; Mayor, M.; et al.
2019. Journal of the American Chemical Society, 141 (23), 9273–9283. doi:10.1021/jacs.9b02544 

Insertion of [1.1.1]propellane into aromatic disulfides.
Bär, R. M.; Heinrich, G.; Nieger, M.; Fuhr, O.; Bräse, S.
2019. Beilstein journal of organic chemistry, 15, 1172–1180. doi:10.3762/bjoc.15.114